The Macromatic VAKP110D is a voltage monitor relay. This 8 Pin plug-in relay has a nominal voltage of 110V DC. It checks for over or under voltage errors, with an output of 10A DPDT. The VAKP110D has an adjustable pick-up voltage & drop-out voltage, with an adjustable drop-out time delay ranging from 0.1-10 sec. It has an LED indicator that is red when the unit is energized or green when it is not. It uses an 8 Pin 70169-D octal socket. Note: Image is an approximation. Actual part may differ.

Specifications

Relay Function- Over/Undervoltage
Nominal Voltage- 110V DC
Output- 10A DPDT
Drop-out Time Delay- 0.1-10 sec
Pick-up Voltage Range- 83-138V DC
Drop-out Voltage Range- 62-130V DC (75-95% of Pick-Up)
Load- <2VA
Operating Temperature- -28 C to 65 C (-18 F to 149 F)
Storage Temperature- -40 C to 85 C (-40 F to 185 F)
Voltage Tolerance- +/-50% of Nominal Voltage
Output Contacts- 10A @ 240V AC, 7A @ 30V DC, 1/4HP @ 120/240V AC, C300
Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
Response Time- Pick-up: 0.5 sec, Drop-out: 0.1-10 sec
Reset- Automatic
Transient Protection- 2000V for IEC 61000-4-5 Level 3 (+/-2kV)
Dimensions- 2.4" Height x 1.7" Width x 3.5" Depth
Approvals- UL and CUL recognized, CE, UL & CUL listed (with Socket)

When the voltage goes above the preset pick-up voltage (83-138V DC), then the unit is energized. If the voltage drops below the preset drop-out for a longer duration than the drop-out time delay, then it de-energizes. Whether the VAKP110D operates for undervoltage or overvoltage protection is based on the kind of output contacts being used.

Overvoltage
Overvoltage protection makes use of a normally closed contact. The voltage needs to stay below the preset pick-up voltage for the load to be energized while the relay itself remains de-energized. If the voltage goes above the pick-up, the reverse happens, until voltage goes below the preset drop-out.

Undervoltage
Undervoltage monitoring requires a normally open contact. The load stays on and the relay is energized if the voltage stays above the preset pick-up. Voltage going below the preset drop-out de-energizes both the load and the relay.

Macromatic VAKP Series Relay Installation Instructions

110VDC Voltage Monitor Relay Macromatic VAKP110D

	Kacon HRF-MD23 Light Duty Foot Switch, SPDT, Aluminum, Maintained $33.30
	DuraChoice PS403L-K01 Oil Filled Pressure Gauge, 4" Dial, 3/8" NPT, 0-1000 PSI, Lower Mount $53.41
	DuraChoice PB404L-400 Oil Filled Pressure Gauge, 4" Dial, 1/4" NPT, 0-400 PSI $32.93
	ILME CHP-24L2 C-Type Surface Mount Housing, Size 104.27, Single Lever, PG 21, 2 Entries $41.37
	ILME THIH-06L T-Type Hygienic Bulkhead Mount Housing, Size 44.27, Single Lever $31.50
	Boxco BC-ATS-060905 Enclosure, 65x95x55, Clear Screw Cover, ABS Plastic $7.80
	ILME CCEM-10 CCE Series Insert, Male, Size 57.27, 10 Pin, 16A $12.64
	Menics H16F-10W LED Indicator, 16mm, Flat Head, 110VAC, White $9.22
	Meltric 33-68047 DS60 60A, 277/480V, 3P+N+G Male Inlet $392.40

Macromatic VAKP110D 110V DC Over/Undervoltage Monitor Relay

110VDC Voltage Monitor Relay Macromatic VAKP110D