Meltric 33-34165 DS30 30A, 120V Female Receptacle

Meltric 33-34165 DS30 30A 120V AC Female Receptacle: 1 Pole + Neutral + Ground

Industrial Meltric Decontactor connection rated for 30A at 120V AC. This female receptacle combines 1 pole + neutral + ground, 14 - 4 AWG screw-terminal capacity, IK09 impact resistance, and branch-circuit and motor-circuit disconnect switching.

✅ Female Receptacle for Meltric DS30 Connections

The Meltric 33-34165 is a female receptacle that must be paired with the matching male inlet having the correct voltage, polarity, and DS30 configuration. Verify the complete connection before ordering; the two components are sold separately.

Controlled Disconnecting for Industrial Power

The Meltric 33-34165 DS30 female receptacle is rated for 30A, 120V AC, and 1 Pole + Neutral + Ground. Its branch-circuit and motor-circuit disconnect switching rating supports machinery, motors, production equipment, and other industrial loads that require a fast, repeatable connection point.

A safety shutter covers the receptacle contacts before the plug is removed, while the quick-break mechanism opens the circuit inside an enclosed arc chamber. The impact-, UV-, and corrosion-resistant housing supports Type 3R and IP55 protection. The unit operates from -40 F to 140 F (-40 C to 60 C) and uses 14 - 4 AWG screw-terminal wiring.

🛡️ Safety Shutter

Covers the receptacle contacts before the plug is removed to limit access to energized components.

⏹️ Quick-Break Disconnect

A push-button mechanism breaks the circuit and releases the mating plug through a controlled action.

🔥 Enclosed Arc Chamber

Contains the switching action within the connector body to help control exposure during disconnection.

🔩 Spring-Assisted Terminals

Spring pressure supports a secure screw-terminal connection across the specified 14–4 AWG range.

Key Features & Benefits

Safety Shutter: Closes over the contacts before the mating plug is removed
Quick-Break Mechanism: Push-button operation opens the circuit and releases the plug
Enclosed Arc Chamber: Keeps the switching action contained within the connector
Spring-Loaded Contacts: Maintains contact pressure through repeated mating cycles
Spring-Assisted Screw Terminals: Supports a secure conductor connection
Disconnect Switching: Branch Circuit & Motor Circuit Disconnect Switching
Short-Circuit Performance: 100kA Close & Withstand
Impact Rating: IK09

Specifications

Part Number	33-34165
Brand	Meltric
Series	DS30 Decontactor
Product Type	Female Receptacle
Rated Voltage	120V AC
Rated Current	30A
Polarity	1 Pole + Neutral + Ground
Horsepower Rating	1.5 hp
Switch Rating	Branch Circuit & Motor Circuit Disconnect Switching
Short-Circuit Rating	100kA Close & Withstand
Wiring Capacity	14 - 4 AWG
Terminal Type	Screw
Overall Dimensions	4.13" Height x 3.57" Depth x 3.03" Width
Housing	Blue fiberglass-reinforced thermoplastic polyamide
Temperature Range	-40 F to 140 F (-40 C to 60 C)
Impact Rating	IK09
Environmental Rating	Type 3R / IP 55 (Partial protection from dust and low pressure water jets from any direction)
Listings	UL, CSA

📘 Meltric DS Series User Manual

Review installation, wiring, operation, and maintenance information before use.

📦 Ordering Notes

Ground shipping only.

The product image is for reference; the actual part may differ. Confirm the 120V AC, 1 Pole + Neutral + Ground, and female receptacle configuration before ordering.

🔧 Installation Notes

Pairing: Use with the corresponding DS30 male inlet and compatible plug configuration.

Wiring: Use 14 - 4 AWG conductors and tighten the screw terminals according to the installation manual.

Environmental performance: Confirm that the complete installed assembly satisfies the required Type 3R and IP55 conditions.

⚙️ Typical Applications

Industrial machinery: Create a repeatable power-disconnect point for equipment service

Motor circuits: Connect motors and production equipment within the stated horsepower rating

Maintenance operations: Support faster equipment changeover and electrical isolation procedures