 |
 |
 |
|
HTP DIN 43650 Form C Top Entry Molded Cable Assembly, 3m PVC, 24V LED + MOV
Black EN 175301-803 DIN 43650 Form C molded cable assembly with 8 mm pin spacing, 3 meters of PVC H03VVF cable. Features a 24V AC/DC red LED indicator & MOV surge suppression. Dual ground positions. IP67 protection.
Why Choose This HTP DIN 43650 Form C Cable Assembly?
This HTP DIN 43650 Form C top entry molded cable assembly is built for solenoid valve and industrial control wiring where a pre-molded connector and cable reduce wiring time. It uses 8 mm pin spacing with 2 poles + 2 grounds and includes 3 meters of black PVC H03VVF 3-conductor cable.
The 24V AC/DC red LED indicator confirms voltage supply at the valve connection, while MOV surge suppression helps protect the source and load from overvoltage. Ground positions at 6 and 12 o'clock allow easier cable exit rotation on compatible valves.
💡 24V Red LED
Confirms voltage supply directly at the DIN valve connector
⚡ MOV Suppression
Helps protect the source and load from overvoltage spikes
🔌 3m Molded Cable
Includes 3 meters of black PVC H03VVF 3-conductor cable
🛡️ IP67 Rated
NBR profile gasket supports sealed industrial valve connections
⚠️ Confirm Form C Fit and Ground Position
This cable assembly is designed for DIN 43650 / EN 175301-803 Form C interfaces with 8 mm pin spacing. Confirm the valve interface, 24V circuit requirement, wiring code, and ground position before installation.
The ground is jumpered at 6 and 12 o'clock for easier rotation of the cable exit on compatible valves.
📋 Wiring Code
Pin #1: Brown
Pin #2: Blue
Ground: Yellow/Green, jumpered at 6 and 12 o'clock
This wiring configuration is for 2 poles + jumpered ground.
Key Features & Benefits
- Top entry molded connector design
- 8 mm contact spacing
- 2 poles + 2 grounds
- Ground positions at 6 and 12 o'clock
- 24V AC/DC red LED indicator confirms voltage supply
- MOV surge suppression helps protect source and load
- NBR profile gasket included
- IP67 protection class
Technical Specifications
|
Manufacturer
|
HTP
|
|
Product Type
|
DIN 43650 Form C Top Entry Molded Cable Assembly
|
|
Standard
|
DIN 43650 / EN 175301-803
|
|
Housing & Cable Color
|
Black
|
|
Circuit Type
|
24V AC/DC LED Indicator with MOV Surge Suppression
|
|
LED Indicator Color
|
Red
|
|
Cable Length
|
3 Meters / 9.84 ft.
|
|
Cable Type
|
PVC H03VVF
|
|
Contact Spacing
|
8 mm
|
|
Number of Poles
|
2 Poles + 2 Ground
|
|
Number of Conductors
|
3
|
|
Conductor Section
|
0.5 mm2
|
|
Cable Diameter
|
5.5 mm / 0.22"
|
|
Ground Position
|
6 and 12 o'clock
|
|
Fixing Screw
|
M2.5 x 21.5 mm
|
|
Operating Temperature
|
-22°F to +176°F / -30°C to +80°C
|
|
Stripping
|
35 mm Standard
|
|
Peeling & Tinning
|
5 mm Standard
|
|
Gasket
|
NBR Profile
|
|
Protection Class
|
IP67
|
|
Included Components
|
Connector/cable, center screw, and NBR profile gasket
|
📋 Basic Installation Overview
1. Confirm Interface: Verify that the valve or device uses DIN 43650 / EN 175301-803 Form C with 8 mm pin spacing.
2. Check Wiring: Match Pin #1 to brown, Pin #2 to blue, and ground to yellow/green before energizing the circuit.
3. Install Gasket: Place the NBR profile gasket between the molded connector and valve interface.
4. Rotate Cable Exit: Use the 6 and 12 o'clock ground positions to orient the cable exit as needed for the valve layout.
5. Secure Connector: Fasten the connector with the included M2.5 x 21.5 mm center screw.
Always disconnect power before installation and follow applicable electrical codes for the equipment and environment.
📦 What's Included
• HTP DIN 43650 Form C molded connector/cable assembly
• 3 meters / 9.84 ft. PVC H03VVF cable
• Center screw
• NBR profile gasket
Note: See product images for drawings.
|
|
|
 |
|
 |
|
