 |
 |
 |
|
HTP DIN 43650 Form A Molded Cable Assembly, 24V DC LED with Diode, 1 m PVC Cable, IP67
DIN 43650 / ISO 4400 (EN 175301-803) Form A molded valve connector with a 24V DC LED indicator, protective diode, two poles, dual ground positions, and a 1-meter black PVC cable.
Why Choose This HTP DIN 43650 Form A Cable Assembly?
This HTP molded cable assembly combines a DIN 43650 / ISO 4400 (EN 175301-803) Form A connector with two poles, dual ground positions, and a 1-meter H05VV-F PVC cable. The black cable contains three 18 AWG conductors, while the connector uses standard 18 mm contact spacing.
A 24V DC LED provides a visible indication that voltage is supplied, and the integrated diode provides overvoltage protection. Ground connections at the 12 and 6 o'clock positions make it easier to rotate the cable exit on the valve. The assembly includes the connector cable, center screw, and integrated NBR gasket.
💡 24V DC LED Indicator
Provides a visible indication when voltage is supplied to the connector
🛡️ Integrated Diode
Built-in diode provides overvoltage protection for the connected circuit
🔄 Dual Ground Positions
Jumpered ground at 12 and 6 o'clock supports convenient cable-exit rotation
💧 IP67 Protection
Integrated NBR gasket supports the connector's IP67 protection class
⚠️ Confirm Form, Voltage, and Wiring Compatibility
Before ordering, verify that the valve uses a
DIN 43650 / ISO 4400 Form A interface with 18 mm contact spacing. Confirm the 24V DC LED and diode circuit, pin assignments, ground positions, and M3 x 25 mm fixing screw requirements.
Note: See the product images for connector drawings and dimensional details.
📋 Wiring Code: 2 Poles + Jumpered Ground
Use the following conductor color assignments when wiring the HTP Form A molded cable assembly:
Pin 1: Brown
Pin 2: Blue
Ground: Yellow/Green
The ground is jumpered between the 12 and 6 o'clock positions.
Key Features & Benefits
- Two poles with ground positions at 12 and 6 o'clock
- Jumpered ground supports convenient cable-exit rotation on the valve
- 24V DC LED confirms voltage supply
- Integrated diode provides overvoltage protection
- 1-meter (3.28-foot) black H05VV-F PVC cable
- Three-conductor cable with 18 AWG / 0.75 mm² conductors
- Black connector housing and cable
- M3 x 25 mm center fixing screw
- Integrated NBR gasket
- IP67 protection class
Technical Specifications
|
Brand
|
HTP
|
|
Connector Standard
|
DIN 43650 / ISO 4400 (EN 175301-803)
|
|
Connector Form
|
Form A
|
|
Housing & Cable Color
|
Black
|
|
Circuit Type
|
24V DC LED with Diode
|
|
Cable Length & Type
|
1 m (3.28 ft) PVC H05VV-F
|
|
Cable Conductors
|
3
|
|
Contact Spacing
|
18 mm
|
|
Number of Poles
|
2 Poles + 2 Grounds (Jumpered at 12 & 6 O'Clock Positions)
|
|
Conductor Size
|
0.75 mm² (18 AWG)
|
|
Fixing Screw
|
M3 x 25 mm
|
|
Gasket
|
Integrated NBR
|
|
Ground Position
|
12 & 6 O'Clock Positions
|
|
Protection Class
|
IP67
|
📋 Selection and Connection Overview
1. Confirm the Interface: Verify that the valve accepts a DIN 43650 / ISO 4400 Form A connector with 18 mm contact spacing.
2. Check the Circuit: Confirm that a 24V DC LED with diode is appropriate for the application.
3. Verify the Wiring: Connect Pin 1 to brown, Pin 2 to blue, and ground to the yellow/green conductor.
4. Select the Cable Exit: Use the jumpered ground at the 12 or 6 o'clock position to orient the cable exit on the valve.
5. Secure the Assembly: Confirm that the integrated NBR gasket is properly seated and use the supplied M3 x 25 mm center screw.
See the product images for drawings and follow the valve manufacturer's wiring and installation instructions.
📦 What's Included
• HTP DIN 43650 Form A Molded Connector Cable Assembly
• M3 x 25 mm Center Fixing Screw
• Integrated NBR Gasket
|
|
|
 |
|
 |
|
