Saginaw SCE-9PB Push Button Enclosure, 9 Position, 30.5mm

Saginaw Control & Engineering SCE-9PB is a 9 position push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 30.5mm pushbutton entrances in a 3x3 configuration. Used for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 9.5" H x 8.5" W x 3" D (241.3mm x 216mm x 76.2mm)
• Seams are continuously welded
• Cover screws thread into sealed wells
• Accepts any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrances
• Gasket is oil & water resistant
• Welded mounting provision located on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Industrial Enclosure & Junction Box Selector