 |
The Menics PTE-SCF-3FF-RYG-B 3 stack LED tower light has a 56mm diameter and is rated for 90-240V. It has red yellow & green lenses with a steady & flashing light and is prewired with 25" lead. This PTE series direct mount light has a modular system, making it easier to switch out parts if needed. It has prism cut lenses for optimal light distribution. The tower light itself comes pre-assembled. Perfect for applications in factory automation. Steady or flashing mode depends on how it is wired (see wiring diagram). Rated IP 65.
Specifications
- Light Operation- Steady & Flashing
- Power Supply- 90-240V AC
- Mounting/Connection- Direct Mount / Lead Wires (see mounting accessories below)
- Lead Length- 25"
- Lens Colors- Red Yellow & Green
- Number of LED Tiers- 3 Stack
- Dimensions (Tower Light Only)- 221 mm Height x 56 mm Diameter (8.7" x 2.2")
- Brightness- 11 Lumens, 880 mcd (Red), 9 Lumens, 720 mcd (Yellow), 7 Lumens, 560 mcd (Green)
- Current Consumption- 0.017 Amps (Red & Yellow) 0.022 Amps (Green)
- Flash Rate- 80 times per minute
- Vibration- 0.75mm at 10-55Hz
- Ambient Temperature- -15 C to 40 C (5 F to 104 F)
- Storage Temperature- -40 C to 70 C (-40 F to 158 F)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 65 (Total protection from dust and water jets in any direction)
- Approvals- CE, UL, RoHS
Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart
|
|
|
