The Macromatic VAKP024D is a voltage monitor relay. This 8 Pin plug-in relay has a nominal voltage of 24V DC. It monitors against over or under voltage errors and has an output of 10A DPDT. The VAKP024D features an adjustable pick-up voltage, drop-out voltage and an adjustable time delay ranging from 0.1-10 sec. It features an LED that is red when the unit is energized or green when it is not. It uses an 8 Pin 70169-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- Over/Undervoltage
- Nominal Voltage- 24V DC
- Output- 10A DPDT
- Drop-out Time Delay- 0.1-10 sec
- Pick-up Voltage Range- 18-30V DC
- Drop-out Voltage Range- 14-28V DC (75-95% of Pick-Up)
- Load- <2VA
- Setting Accuracy- Max Setting (adjustable): +5%, -0%
Min Setting (adjustable): +0%, -50%
Fixed Voltage Setting: +/- 2%
- Repeatability- <1%
- Sensing Accuracy- Constant conditions within specs: +/- 2%
Variable conditions within specs: +/- 5%
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Voltage Tolerance- +/-50% of Nominal Voltage
- Output Contacts- 10A @ 240V AC, 7A @ 30V DC, 1/4HP @ 120/240V AC, C300
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Response Time- Pick-up: 0.5 sec, Drop-out: 0.1-10 sec
- Reset- Automatic
- Transient Protection- 2000V for IEC 61000-4-5 Level 3 (+/-2kV)
- Dimensions- 2.4" Height x 1.7" Width x 3.5" Depth
- Approvals- UL and CUL recognized, CE, UL & CUL listed (with Socket)
When the voltage stays above the preset pick-up voltage (18-30V DC), then the unit is energized. If the voltage goes below the preset drop out for greater duration than the drop-out time delay, then it de-energizes. Whether the VAKP024D operates for undervoltage or overvoltage protection is subject to the kind of output contacts being used.
Overvoltage
Overvoltage protection makes use of a normally closed contact. The voltage needs to stay below the preset pick-up voltage for the load to be energized while the relay itself remains de-energized. If the voltage goes above the pick-up, the reverse happens, until voltage goes below the preset drop-out.
Undervoltage
Undervoltage monitoring requires a normally open contact. The load stays on and the relay is energized if the voltage stays above the preset pick-up. Voltage going below the preset drop-out de-energizes both the load and the relay.
Macromatic VAKP Series Relay Installation Instructions
Macromatic VAKP024D 24V 8 Pin Voltage Monitor Relay
