Home > Industrial Ethernet Switches > Hirschmann Ethernet Switches >

Hirschmann 942104003 GECKO 4TX 4 Port Lite Managed Ethernet Switch

Hirschmann GECKO 4TX 4 Port Lite Managed Ethernet Switch
Hirschmann 942104-003 GECKO 4TX 4 Port Lite Managed Ethernet Switch

Alternative Views:

Price: $368.89
Note: Please call or email [email protected] for alternatives
MFG P/N: 942104003
MFG: Hirschmann / Belden
Weight (lbs): 0.2

Quantity in Stock :(Out of Stock)

Out of Stock
Product Code: 942104-003


The Hirschmann GECKO 4TX (P/N: 942104-003) is a 4 port lite-managed Industrial ETHERNET Rail-Switch that features store and forward switching mode, Ethernet/Fast-Ethernet, and 4 x 10/100BASE-TX, twisted pair RJ45 ports. It also features auto-crossing, auto-negotiation & auto polarity, and a fanless design. Rated IP 30 (Protection from objects 2.5 mm wide or larger)

  • Auto polarity exchange - If the receive line pair is incorrectly connected (RD+ and RD- switched) polarity is automatically reversed.
  • Auto-negotiation - a procedure in which the switch automatically selects the operating mode of its 10/100 RJ-45 ports.
  • Auto-crossing - automatically configures its port for the correct transmit and receive pins
  • Offers a managed switch in a compact housing
  • Low power consumption provides cost-effective operation
  • Features protocols such as SNMP (Simple Network Management Protocol) and RSTP (Rapid Spanning Tree Protocol)
  • Resistant to shock and vibration
  • Reliable operation due to redundancy and diagnostic features
  • Security features include VLAN, MAC- Based port security, and Secure Boot
  • Common applications include machine builders, renewable energy, automation, food & beverage, and material handling

Hirschmann GECKO 4TX Manuals


More Interfaces
Power supply/signaling contact 1 plug-in terminal block, 3-pin, no signaling contact
Network size - Length of cable
Twisted pair (TP) 0 - 100 m
Network size - Cascadibility
Line - / star topology any
Power requirements
Operating voltage 9.6 VDC - 32 VDC
Current consumption at 24 V DC 0.12 Amps
Power consumption 2.35 Watts
Power output in BTU/hr 8
Switching TOS/DSCP prioritization (Mapping TOS/DSCP to 802.1D/p), Prioritization through 4 queues, Static unicast/multicast filter entries (up to 100), VLAN support
Redundancy RSTP (IEEE 802.1D-2004)
Management Web-interface, HTTP(s) config file/firmware transfer, SNMP v1/v2/v3
Diagnostics Device status indication (LEDs), Log-File, RMON (1) statistics, Simple interface statistics, Topology Discovery according to IEEE 802.1AB (LLDP)
Configuration DHCP Relay with Option 82, HiDiscovery, BOOTP/DHCP
Security SNMPv3 (authNoPriv), Possibility to disable each port
Ambient conditions
Operating temperature 0 C to +60 C (32 F to 140 F)
Storage/transport temperature -40 C to +85 C (-40 F to 185 F)
Relative humidity (non-condensing) 5% to 95%
MTBF (MIL-HDBK 217F: Gb 25 ÂșC) 56.6 Years
Mechanical construction
Housing Dimensions 25 mm Width x 114 mm Height x 79 mm Depth (1" x 4.5" x 3.1")
Mounting DIN Rail
Weight 103 Grams
Protection class IP 30
Mechanical stability
IEC 60068-2-27 shock 15 g, 11 ms duration
IEC 60068-2-6 vibration 3.5 mm, 5-8.4 Hz, 10 cycles,1 octave/min; 1 g, 8.4-150 Hz, 10 cycles, 1 octave/min
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) 4 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field 10 V/m (80 - 3000 MHz)
EN 61000-4-4 fast transients (burst) 2 kV power line, 4 kV data line
EN 61000-4-5 surge voltage power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity 10 V (150 kHz - 80 MHz)
EMC emitted immunity
FCC CFR47 Part 15 FCC 47 CFR Part 15 Class A
EN 55032 EN 55032 Class A
Safety of industrial control equipment cUL 61010-1
Scope of delivery
Scope of delivery device, terminal block, safety & general info sheet

Hirschmann 942104-003 GECKO 4TX Ethernet Switch