 |
 |
 |
|
Industrial Ethernet
Hirschmann SPIDER III SPIDER-SL-20-06T1M2M299SY9HHHH: 8-Port Unmanaged Industrial Ethernet Rail-Switch
Store-and-forward switching; plug-and-play setup.
✓ Unmanaged Industrial Ethernet Switch: DIN Rail Networking
Ports: 6 x 10/100BASE-TX, twisted pair RJ45 sockets and 2 x 100BASE-FX, multimode SC fiber ports
Overview
The Hirschmann Spider III SPIDER-SL-20-06T1M2M299SY9HHHH (P/N: 942132-012) is an 8 port unmanaged Industrial Ethernet Rail-Switch that features store and forward switching mode, Ethernet (10/100 Mbit/s), 6 x 10/100BASE-TX, twisted pair RJ45 sockets and 2 x 100BASE-FX, multimode SC fiber ports. It also features auto-crossing, auto-negotiation & auto polarity, and a fanless design. It has plug-and-play setup, and provides a cost effective solution. LED indicators show the status of each port.
8 Ports10/100 Mbit/s2 x Multimode SC fiber
This SPIDER III switch is built for industrial equipment networks where compact DIN rail hardware, fanless operation, and visible port diagnostics are required. Use it to connect PLCs, HMIs, I/O devices, machine controls, and plant-floor network segments without managed-switch configuration.
🌐 Industrial Ethernet Connectivity
Switching: Store-and-forward unmanaged operation for compact industrial networks.
Ports: 6 x 10/100BASE-TX, twisted pair RJ45 sockets and 2 x 100BASE-FX, multimode SC fiber ports.
Diagnostics: LEDs (power, link status, data, data rate).
Key Features
- Auto polarity exchange - If the receive line pair is incorrectly connected (RD+ and RD- switched) polarity is automatically reversed.
- Auto-negotiation - a procedure in which the switch automatically selects the operating mode of its 10/100/1000 RJ-45 ports.
- Auto-crossing - automatically configures its port for the correct transmit and receive pins
- 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
- 10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
- Twisted pair RJ45 ports connect based on the IEEE 802.3 standard
- Common applications include machine builders, automation & manufacturing plants, transportation, and security
- 10/100 Mbit/s Industrial Ethernet communication
- Fanless design for control cabinets and plant-floor equipment
✅ Why Choose This Ethernet Switch?
This Hirschmann SPIDER III switch gives machine builders and maintenance teams a compact way to expand industrial Ethernet connections while keeping setup simple. Auto-crossing, auto-negotiation, auto polarity, and fanless operation help reduce network hardware issues in control cabinets and distributed equipment.
Applications
Use this unmanaged industrial Ethernet switch in compact machine and facility network segments where reliable 10/100 Mbit/s communication is needed.
- Machine builder control panels and OEM equipment
- Automation and manufacturing plant networks
- Transportation communication systems
- Security and monitoring network hardware
Performance Benefits
- Unmanaged operation keeps network deployment simple for small industrial Ethernet segments
- Auto-negotiation helps RJ45 ports select the proper 10/100 operating mode
- Auto-crossing helps correct transmit and receive pin configuration without special cabling
- LED diagnostics make it easier to check power, link status, data activity, and data rate
- Fiber connectivity supports longer network runs or electrical isolation where copper alone is not ideal
Specifications
|
Brand
|
Hirschmann
|
|
Series
|
SPIDER III
|
|
Model
|
SPIDER-SL-20-06T1M2M299SY9HHHH
|
|
Product Code
|
942132-012
|
|
Part Number
|
942132012
|
|
Type
|
8-Port Unmanaged Industrial Ethernet Rail-Switch
|
|
Ports
|
8 ports
|
|
Network Speed
|
10/100 Mbit/s
|
|
Port Configuration
|
6 x 10/100BASE-TX, twisted pair RJ45 sockets and 2 x 100BASE-FX, multimode SC fiber ports
|
|
Mounting
|
DIN Rail
|
|
Protection Class
|
IP 30
|
More Interfaces
|
Power supply/signaling contact
|
1 plug-in terminal block, 3-pin
|
Network size - Length of cable
|
Twisted pair (TP)
|
0 - 100 m
|
|
Multimode fiber (MM) 50/125
|
0 - 5000 m (Link Budget at 1310 nm = 0 - 8 dB; A=1 dB/km; BLP = 800 MHz*km)
|
|
Multimode fiber (MM) 62.5/125
|
0 - 4000 m (Link Budget at 1300 nm = 0 - 11 db; A = 1 dB/km; BLP = 500 MHz*km)
|
Network size - Cascadibility
|
Line - / star topology
|
any
|
Power requirements
|
Operating voltage
|
12/24V DC (9.6 VDC - 32 VDC)
|
|
Current consumption at 24 V DC
|
Max 160 mA
|
|
Power consumption
|
Max. 3.8 W, 12.8 Btu (IT)/h
|
Service
|
Diagnostics
|
LEDs (power, link status, data, data rate)
|
Ambient conditions
|
Operating temperature
|
0 C to +60 C
|
|
Storage/transport temperature
|
-40 C to +70 C
|
|
Relative humidity (non-condensing)
|
10 % to 95%
|
|
MTBF (Telecordia)
|
1,499,396 hours
|
Mechanical construction
|
Housing dimensions (w/o terminal block) W x H x D
|
45mm x 110mm x 82mm
|
|
Mounting
|
DIN Rail
|
|
Weight
|
230 g
|
|
Protection class
|
IP 30
|
Mechanical stability
|
IEC 60068-2-27 shock
|
15 g, 11 ms duration, 18 shocks
|
|
IEC 60068-2-6 vibration
|
3.5 mm, 5-8.4 Hz, 10 cycles, 1 octave/min; 1 g, 8.4-150 Hz, 10 cycles, 1 octave/min
|
EMC interference immunity
|
EN 61000-4-2 electrostatic discharge (ESD)
|
4 kV contact discharge, 8 kV air discharge
|
|
EN 61000-4-3 electromagnetic field
|
10 V/m (80 - 1000 MHz)
|
|
EN 61000-4-4 fast transients (burst)
|
2 kV power line, 4 kV data line
|
|
EN 61000-4-5 surge voltage
|
power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
|
|
EN 61000-4-6 conducted immunity
|
10 V (150 kHz - 80 MHz)
|
EMC emitted immunity
|
FCC CFR47 Part 15
|
FCC 47 CFR Part 15 Class A
|
|
EN 55022
|
EN 55022 Class A
|
Approvals
|
Basis Standard
|
CE, FCC, EN61131
|
|
Safety of industrial control equipment
|
cUL61010-1/61010-2-201
|
What's Included
- device
- terminal block
- safety instruction
|
|
|
 |
|
 |
|
