 |
Sealcon CD07AR-TE PVDF 1/4" NPT / PG 7 Cord Grip, -31°F to 302°F
A chemical-resistant PVDF cord grip for 0.08" to 0.20" cable. Its -31°F to 302°F operating range supports hot, cold, and chemically demanding applications.
Why Choose the Sealcon CD07AR-TE Cord Grip?
The Sealcon CD07AR-TE, also known as Hummel 1.299.0700.15, is a high-quality PVDF liquid-tight strain relief cord grip. It is sold individually and accommodates 0.08"–0.20" (2–5 mm) cable.
The PVDF body and fluoroelastomer sealing material are designed for cable entries exposed to chemicals or extreme temperatures while maintaining liquid-tight protection. Interchangeable standard and reduced inserts provide added sizing flexibility, while the overlapping clamping splines apply concentric force for pull-out resistance.
🔩 1/4" NPT / PG 7 Thread
Confirm the equipment entry matches this thread size and type
📏 0.08"–0.20" (2–5 mm) Cable Range
Match the cable outside diameter to the specified clamping range
🛡️ Rugged Material System
PVDF body with FPM (Viton) sealing material
💧 Liquid-Tight Protection
NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
⚠️ Order the Locking Nut Separately
The locking nut is sold separately. Contact us if individual standard or reduced inserts are required for the application.
📋 Chemical and Temperature Resistance
The PVDF body is resistant to chemicals and performs across an operating range of -35°C to 150°C (-31°F to 302°F). Standard and reduced inserts can be exchanged to adjust the cable opening.
Key Features & Benefits
- PVDF body with FPM seal
- Operating temperature: -35°C to 150°C (-31°F to 302°F)
- Submersible to 300 ft.; NEMA 4X and 6 (IP68/IP69K)
- 150 psig (10 bar) pressure rating
- Flame protection to UL 94
- Halogen- and phosphorus-free
- Vibration-resistant dome
- Resists salt water, acids, alkalis, gasoline, and oils
- Durable, rugged construction
- RoHS and Deca-BDE, CSA approval
- Sold individually
Technical Specifications
|
Product Code
|
CD07AR-TE
|
|
Hummel Part Number
|
1.299.0700.15
|
|
Product Type
|
PVDF liquid-tight strain relief cord grip
|
|
Body / Seal Material
|
PVDF body with FPM (Viton) sealing material
|
|
Thread Size
|
1/4" NPT / PG 7
|
|
Cable O.D. Range
|
0.08"–0.20" (2–5 mm)
|
|
Through-Hole Diameter
|
0.49" (12.5 mm)
|
|
Body Length
|
0.75" (19 mm)
|
|
Thread Length
|
0.2" (5 mm)
|
|
Dome Wrench Flat
|
0.55" (14 mm)
|
|
Body Wrench Flat
|
0.55" (14 mm)
|
📋 Selection Checklist
1. Match the Thread: Confirm the equipment opening accepts 1/4" NPT / PG 7.
2. Measure the Cable: Verify that the cable outside diameter falls within 0.08"–0.20" (2–5 mm).
3. Confirm the Material: Make sure pvdf body with fpm (viton) sealing material is appropriate for the application.
4. Check the Protection Level: The fitting is rated NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
5. Verify the Pressure Rating: The stated pressure rating is 150 psig (10 bar).
📦 What's Included
• One Sealcon CD07AR-TE cord grip
• FPM (Viton) sealing material
✅ Approvals & Compliance
• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• UL/cUL Listed
• UL Registered
• EAC
• CE
• German Lloyd
🏷️ Product Identification
Sealcon Product Code: CD07AR-TE
Hummel Part Number: 1.299.0700.15
Product Names: Cord grip, strain relief fitting, or cable gland
Sales Unit: Sold individually
|
|
|
