Sealcon SR-34-NY high quality polyethylene seal rings are liquid tight to 150 psi. 3/4" NPT Thread. Sold Individually.
Specifications
- Thread Size/Type: 3/4" NPT
- Inner Diameter: 1.06" (27 mm)
- Outer Diameter: 1.43" (36 mm)
- Height: .04" (1 mm)
Features
- Polyethylene Material
- Operating Temperature - -22 F to 158 F (-30 C to 70 C)
- Submersible to 300 Ft - NEMA 4x & 6 (IP68 / IP 69 K)
- 150 PSIG (10 Bar) Rating
- RoHS & Deca BDE approval
The Snap Elbows and some of the Conduit Fittings do not have recess for an O-Ring. In that case, the Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring. If NEMA 4x or 6 (European IP 68 - submersible) is required, Seal Rings should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut. The Straight Strain Relief fittings feature a molded O-Ring groove.
