 |
Sealcon CD08MW-BR: Mini WADI Nickel-Plated Brass M8 Cable Gland for 3–5 mm Cable
Compact nickel-plated brass M8 x 1.25 cable gland for 0.12–0.20 in. (3–5 mm) cable. The Mini WADI design fits space-constrained sensors, cameras, fiber-optic equipment, switches, instruments, and small appliances while providing NEMA 4X and IP68 protection.
✅ Compact M8 Cable Entry for Tight Spaces
The CD08MW-BR Mini WADI is designed for installations where enclosure space is limited. It uses an M8 x 1.25 thread, accepts 0.12–0.20 in. (3–5 mm) cable, and has 0.43 in. (11 mm) wrench flats for compact equipment and small housings.
Small Footprint, High-Temperature Cable Protection
The Sealcon CD08MW-BR Mini WADI cable gland provides strain relief and environmental sealing without the bulk of a full-size fitting. Its nickel-plated brass body is appropriate for compact industrial instruments.
A Buna-N seal closes around the cable jacket, while the compact M8 x 1.25 thread fits small entry holes. The fitting operates from -25°C to 200°C (-13°F to 392°F) and carries NEMA 4X and IP68 ratings for demanding temperature and moisture conditions.
🔬 Mini WADI Size
Compact 11 mm wrench flats fit small housings and crowded equipment
🌡️ Up to 200°C
Operating range of -25°C to 200°C (-13°F to 392°F)
💧 NEMA 4X / IP68
Liquid-tight environmental protection with a 70 psig pressure rating
🔩 M8 x 1.25 Thread
Metric entry accepts 3–5 mm cable with a 6 mm thread length
Key Features & Benefits
- Space-Saving Design: Compact Mini WADI body fits tight equipment layouts
- M8 Metric Thread: Uses an M8 x 1.25 entry with a 0.24 in. (6 mm) thread length
- 3–5 mm Cable Range: Fits 0.12–0.20 in. cable outside diameter
- High-Temperature Rating: Operates from -25°C to 200°C (-13°F to 392°F)
- Environmental Protection: Rated NEMA 4X and IP68
- Pressure Rating: Rated to 70 psig (5 bar)
- Chemical Resistance: Resists salt water, acids, alkalis, gasoline, and oils
- Sold Individually: Locking nut is sold separately
Specifications
|
Part Number
|
CD08MW-BR
|
|
Brand
|
Sealcon
|
|
Product Line
|
Mini WADI
|
|
Alternate Part Number
|
Hummel 1.106.0801.50
|
|
Product Type
|
Miniature metric cable gland / cord grip
|
|
Thread Size
|
M8 x 1.25
|
|
Cable O.D. Range
|
0.12–0.20 in. (3–5 mm)
|
|
Through-Hole Diameter
|
0.31 in. (8 mm)
|
|
Body Length
|
0.51 in. (13 mm)
|
|
Thread Length
|
0.24 in. (6 mm)
|
|
Wrench Flat — Dome
|
0.43 in. (11 mm)
|
|
Wrench Flat — Body
|
0.43 in. (11 mm)
|
|
Body Material
|
Nickel-plated brass
|
|
Seal
|
Buna-N
|
|
Operating Temperature
|
-25°C to 200°C (-13°F to 392°F)
|
|
Environmental Ratings
|
NEMA 4X; IP68
|
|
Pressure Rating
|
70 psig (5 bar)
|
📦 What's Included
• (1) CD08MW-BR Mini WADI M8 cable gland
• Integrated Buna-N seal
✅ Approvals & Compliance
- RoHS compliance
- Deca-BDE compliance
- REACH compliance
- WEEE compliance
- EAC
📏 M8 Miniature-Gland Selection
Verify an M8 x 1.25 entry, 0.12–0.20 in. (3–5 mm) cable O.D., and suitable material compatibility. Allow space for the 0.43 in. (11 mm) wrench flats and confirm that the installation temperature stays within the stated range.
🔧 Installation Notes
Confirm M8 thread: Check that the equipment entry is M8 x 1.25 and provides adequate engagement for the 6 mm thread.
Route the cable: Keep the 3–5 mm cable centered as it passes through the compact sealing element.
Secure the body: Use a compatible locking nut when needed; it is sold separately.
🏭 Typical Applications
Industrial sensors and cameras
Fiber-optic and communications equipment
Compact switches and instruments
Small appliances and space-constrained enclosures
|
|
|
