This Sealcon M16 male signal rear mount panel connector with flange features a 10 pin insert for 1 mm contacts. The housing is nickel plated brass with brass alloy contacts. The housing can accept 2-7 mm cable. Rated IP67 / IP69K. Comes un-assembled with separate housing, insert, and crimp contacts. Note: Image is for reference, actual product may differ

• No tools needed to insert or remove contacts
• Euro-Lock keeps contacts in position
• EMI shielding
• Features strain relief

Includes:

• Housing - (1) 2-7 mm (.08"-.28") Cable O.D. (P/N S7.847.300.000)
• Insert - (1) 10 Pin, 8 A, 160V, for crimp contacts (P/N S7.003.910.101)
• Contacts - (10) 28-18 AWG 1 mm Crimp Pins (P/N S7.010.981.001)

Specifications

• Housing - Nickel Plated Brass
• Housing Dimensions- 1.81" Length x 0.78" Width x 0.78" Height
• Insert - PBT
• Contacts - Brass Alloy
• Contact Surface - Gold Plated Nickel
• Orientation - Male
• Cable Range - 2 - 7 mm (.08"- .28")
• Contacts - 10
• Crimp Wire Gauge - 28-18 AWG
• Operating Temperature - -40 F to 257 F (-40 C to 125 C).
• Nominal Current - 8 Amps
• Nominal Voltage - 160V
• Min. Mating Cycles- >1000
• Insulation Resistance - >10^6 MOhm
• Max. Contact Resistance - 3 mOhm
• Mating Thread - M16
• Type of Connection - Crimp Contact
• IP Protection - IP 67 / IP 69 K

Sealcon 10 Pole 28-18 AWG Male Rear Panel Mount M16 Connector with Flange