Overview
The
Sealcon CD25M4-GY is a gray nylon multi-hole cord grip designed for routing and sealing multiple cables through one entry point. This M25 x 1.5 fitting has 4 holes with .2" (5mm) hole diameters and is built for tough industrial applications where cable strain relief, environmental sealing, and vibration resistance are required.4 HolesIP65Nylon 6/6
Made from Nylon 6/6 with an elastomer seal, this cord grip provides NEMA 4X / IP65 protection when properly matched to the cable diameter. A NEMA 6 / IP68 rating may be possible when the cable and hole fit are ideal.
🔒 Multi-Cable Sealing & Strain Relief
Four Cable Openings: Routes multiple small cables through a single M25 panel entry.
Vibration Resistant Dome: Self-locking dome helps keep the seal compressed and protects against cable pull-out.
Durable Material: Nylon 6/6 body resists salt water, acids, alkalis, gasoline, and oils.
Key Features
- M25 x 1.5 metric thread: fits standard M25 metric panel entries
- .2" (5mm) hole diameter: made for small cable sealing applications
- Elastomer seal: helps maintain environmental protection around cables
- IP65 / NEMA 4X rated: protects against dust and water exposure when properly installed
- IP68 / NEMA 6 possible: achievable with an ideal cable-to-hole fit
- UL 94 flame protected: supports use in electrical and control applications
- Halogen and phosphorous free: suitable for compliance-sensitive installations
✅ Why Choose This Cord Grip?
The CD25M4-GY lets multiple cables pass through one M25 hole while maintaining strain relief and environmental sealing. It is a practical option for control panels, junction boxes, machinery, and equipment where space is limited.
Applications
Sealcon metric multi-hole cable glands are used to attach, seal, and strain relieve cable or wire in industrial and electrical equipment.
- Control panels and electrical enclosures
- Machine wiring and automation equipment
- Junction boxes with multiple cable entries
- OEM equipment wiring
- Industrial cable strain relief applications
Seal Fit Requirements
|
IP65 / NEMA 4X Fit
|
Cable diameter should be at least 80% of the hole diameter.
|
|
Maximum Gap
|
Cable and hole diameter should not differ by more than .04" (1mm).
|
|
IP68 / NEMA 6 Fit
|
Possible when there is an ideal fit.
|
⚠️ Important Ordering Info
Locking nut and O-ring are sold separately.
Product is sold individually. Image is an approximation; actual part may differ.
Performance Benefits
- Reduces the number of panel holes needed for multiple small cables
- Provides strain relief to help protect cable connections
- Helps seal out dust and water when cable fit is correct
- Resists common industrial chemicals and oils
- Self-locking dome helps prevent seal displacement and cable pull-out
