 |
Saginaw Control & Engineering SCE-1614CHNFSS is a continuous hinge enclosure. It is made from 0.063" 304 stainless steel with #4 brushed finish and measures 16.13" H x 14" W x 6" D (409.702mm x 355.6mm x 152.4mm). Can be used as a junction box, terminal enclosure, or control box. The stainless steel material makes it ideal for use in hose down applications or around corrosive environments.
- Continuously welded & ground smooth seams
- Continuous stainless steel hinge all the way down the side
- Door fastened by two exterior screw clamps
- Gasket is oil & water resistant
- Standoffs for mounting sub-panels included (sub-panels sold separately)
- Ground stud on door
- Mounting provisions are located on the back, welded to the top and bottom
- IS6 industry standards - NEMA Type 3R, 4, 4x, 12 and Type 13, UL Listed Type 3R, 4, 4x, and 12, CSA 4, 4x, and 12, IEC 60529, IP 66 (Special Instructions apply for IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door)
|
|
|
