Saginaw Control & Engineering SCE-12108CHNF is a continuous hinge enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and measures 12.13" H x 10" W x 8" D (308.102mm x 254mm x 203.2mm). Can be implemented as a junction box, terminal enclosure, or control box.

• Continuously welded & ground smooth seams
• No holes or knockouts
• Continuous hinge all the way down the side
• Stainless steel hinge pins
• Door fastened by two outside screw clamps
• Gasket is oil resistant
• Standoffs for mounting sub-panels provided (sub-panels sold separately)
• Ground stud on door and body
• Mounting provisions are located on the back, welded to the top and bottom
• IS4 industry standards - NEMA Type 3R, 4, 12 and Type 13, UL Listed Type 3R, 4 and 12, CSA Type 3R, 4 and 12, IEC 60529, IP 66 (Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door)

12.13" x 10" x 8" Enclosure with Continuous Hinge Saginaw SCE-12108CHNF