 |
 |
 |
|
Saginaw SCE-10086FW Windowed Fiberglass Junction Enclosure with Padlock Latches, 11.38 x 9.37 x 5.08 in.
View enclosed components through an 8.25" x 6.25" window while protecting them from dirt and moisture. Quick release padlock latches provide access to this fiberglass junction enclosure.
✅ Application Guide
Use this windowed fiberglass model where enclosed instruments need regular visual checks in wet or corrosive conditions. The padlock latch design is useful when access to the enclosure needs to be controlled.
Windowed Access for Electronic Controls
The Saginaw Control & Engineering SCE-10086FW junction enclosure keeps electronic components visible in hose down or corrosive environments. Its UVA acrylic bonded polycarbonate window provides an 8.25" H x 6.25" W viewing area for observing instruments through the closed cover.
Fiberglass reinforced compression molded polyester forms the 11.38" H x 9.37" W x 5.08" D housing. Quick release padlock latches work with a continuous stainless steel hinge for access during service. A continuous memory retaining gasket seals the cover.
Key Features & Benefits
- Continuous memory retaining gasket
- Molded mounting strips
- Quick release padlock latches
- Continuous stainless steel hinge
- Built in panel mount inserts
- UVA acrylic bonded polycarbonate window
Specifications
|
Part Number
|
SCE-10086FW
|
|
Brand
|
Saginaw Control & Engineering
|
|
Enclosure Type
|
Windowed junction enclosure with padlock latches
|
|
Dimensions (H x W x D)
|
11.38" x 9.37" x 5.08"
|
|
Metric Dimensions (H x W x D)
|
289.052 x 237.998 x 129.032 mm
|
|
Material
|
Fiberglass reinforced compression molded polyester
|
|
Window Material
|
UVA acrylic bonded polycarbonate
|
|
Window Dimensions
|
8.25" H x 6.25" W
|
|
Closure
|
Quick release padlock latches
|
|
Gasket
|
Continuous memory retaining gasket
|
|
Subpanel
|
Sold separately
|
|
Industry Standard Group
|
IS5
|
|
NEMA Types
|
4, 4X, 12, 13
|
|
UL Listed Types
|
4, 4X, 12
|
|
CSA Types
|
4, 4X, 12
|
|
Ingress Protection
|
IP66
|
|
IEC Standard
|
IEC 60529
|
📦 Enclosure and Mounting Provisions
One SCE-10086FW enclosure with molded mounting strips and built in panel mounting inserts. The subpanel is sold separately.
🔧 Installation Notes
Use the molded mounting strips to mount the enclosure. Plan component placement on a compatible subpanel, available separately, using the built in panel mounting inserts.
|
|
|
 |
|
 |
|
