Mencom PG29-5X8.5 five hole insert for select PG 29, 1" NPT, or M32 strain relief fittings. Hole diameter 0.335" (8.5 mm). One cord grip can then be used for multiple wires or cables. Wire and cable diameters should be within 0.02" of the hole diameter for an ideal fit. Sold Individually. Note: Image is for reference, actual part may differ

Specifications

Thread Size / Type- 1" NPT, PG 29, M32
Number of Holes- 5
Hole Diameter- 0.335" (8.5 mm)
Material- Black Plastic
IP Rating- IP 65 (provided there is an ideal fit)

Fits

MCG-29
MCG-29R
PCG-29
PCG-29-B
PCG-29R
PCG-29R-B
PCG-1.0
PCG-1.0-B
PCG-1.0R
PCG-1.0R-B
PCG-M32
PCG-M32-B

Mencom PG 29, 1" NPT, & M32 5 Hole Strain Relief Fitting Insert

	Macromatic THR-10568-30J Encapsulated Time Delay Relay, Interval On, 24V, 0.1-10 Sec, Internal Jumper $27.24
	Mueller BU-133 Kelvinized Cast Aluminum Static Grounding Clamp $37.07
	Macromatic CAH20A6AJ Current Sensing Relay, 2-20A, 0.15-7 Sec, 12V, 6 Sec Delay $90.00
	Mencom MDC-2MP-10M M12 Cordset, 2 Pole, Male Straight, 10 M $34.54
	Sealcon M23 Right Angle Panel Mount Signal Connector, 19 Pole $19.73
	Cembre 1900-36 PG 36 .79" - 1.26" (20 - 32 mm) O.D. MAXIblock Cable Gland $5.99
	Sealcon NP-29-BE PG 29 EMI/RFI Proof Locking Nut $9.07
	Saginaw SCE-2PBSS Push Button Enclosure, Stainless Steel, 2 Position, 30.5mm $194.29

Mencom PG29-5X8.5 PG 29, 1" NPT, & M32 5 Hole 0.335" (8.5 mm) Insert

Mencom PG 29, 1" NPT, & M32 5 Hole Strain Relief Fitting Insert