Menics PMEF-2FF-RY 45 mm 2 Stack LED Tower Light, Red Yellow, Flashing, 90-240V

The Menics PMEF-2FF-RY 2 stack LED tower signal light has a 45mm diameter and is rated for 90-240V. It has red & yellow lenses, with a steady & flashing light. Prism cut lens offers a more even light distribution. This PME series light has a modular system, making it simpler to change out parts if necessary. The silver bands clearly define each stack. The signal light itself comes pre-assembled, with a 25" lead. It can be used in high vibration areas due to the vibration absorbing rubber embedded inside. Rated IP 52.

Mounting (See mounting accessories below)

• Pole Mount: Pole + Base
• Wall Mount: Pole + Wall Bracket
• Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
• See our mounting accessories chart (link below description) to see which poles and bases are compatible
• Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request

Specifications

• Light Operation- Steady & Flashing
• Power Supply- 90-240 VAC
• Current Consumption- 0.022 Amps (Red), 0.025 (Yellow)
• Lead Length: 25"
• LED Colors- Red/Yellow
• Number of LED Tiers- 2 Stack
• Lens Material- Polycarbonate Resin
• Housing Material- ABS Plastic Resin
• Flashing Rate- 80 times per minute
• Dimensions (Tower Light Only)- 167 mm Height x 45 mm Diameter (6.57" x 1.77")
• Brightness- 6 Lumens, 480 mcd (Red), 9 Lumens, 720 mcd (Yellow)
• Buzzer- None
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
• Approvals- CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart