The Meltric 69-98043 DSN150 male inlet is rated for 480V and 150A. It features 3 Poles plus ground. It has a wiring capacity of 4-2/0 AWG with a temperature range of -40 F to 140 F. The body is a zinc/aluminum alloy that has been treated to deter corrosion. It withstands exposure to certain substances, such as cleansing soap, gas, engine oil and ethyl alcohol. The two tabs on the sides allow the receptacle to latch on to it easily for a more secure fitting. Type 4X for water tightness, rated IP 66 / IP 67. UL listed.
Note: Image is for reference, actual part may differ. Ground shipping only
Specifications
- Rated Voltage- 480V AC
- Rated Current- 150A
- Overall Dimensions- 5.24" Width x 5" Height x 4.14" Depth
- Polarity- 3 Pole + Ground
- Switch Rating (AC only)- Branch Circuit & Motor Circuit Disconnect Switching
- Horsepower Rating- 3Ø 75 hp
- Short Circuit Rating- 100kA Close & Withstand (testing with 225A RK1 non-time delay Mersen fuses),
10kA Close & Withstand (testing with 400A RK1 non-time delay Mersen fuses)
- Temperature Range- -40 F to 140 F (-40 C to 60 C)
- Wiring Capacity- 4-2/0 AWG
- Terminal Type- Screw
- Environmental Rating- Type 4X, IP 66 / IP 67
- Listings- UL, CSA
The 69-98043 power connector is designed to create optimum safety by minimizing the chances of arc flash. The durable construction is designed to last through repeated use without immediately needing replacement parts, lowering costs. The compact design of the Meltric DSN Decontactor series does not much space. It creates a watertight assembly when connected with the right female receptacle, so it works well in wet or washdown applications in industrial environments. These connectors also have plug and play capability for a quick, easy disconnect, making for a more streamlined operation by having less downtime.
Silver nickel contacts: 85% silver, 15% nickel combination. Creates a durable and highly conductive contact point. Oxidation or tarnishing will not greatly affect its contact resistance. Withstands repeated connecting and disconnecting
Lockout tagout capability: A 5/16" hole in the plug housing makes it simple to use a padlock on the plug if necessary, in order to keep it from being inserted into a receptacle.
Meltric DSN Series User Manual
