The Meltric 63-38047 DSN30 male inlet is rated for 277/480V and 30A. It features 3 Poles plus ground and neutral. It has a wiring capacity of 14-8 AWG with a temperature range of -40 F to 140 F. The body is blue thermoplastic polyester, fiberglass reinforced, with silver-nickel contacts. The housing is impact resistant and also withstands exposure to UV radiation and chemicals. Type 4X for water tightness, rated IP 66 / IP 67. UL listed.
Note: Image is for reference, actual part may differ. Ground shipping only
Specifications
- Rated Voltage- 277/480V AC
- Rated Current- 30A
- Overall Dimensions- 2.64" Width x 2.85" Height x 2.56" Depth
- Polarity- 3 Pole + Neutral + Ground
- Switch Rating (AC only)- Branch Circuit & Motor Circuit Disconnect Switching
- Short Circuit Rating- 100kA Close & Withstand
- Temperature Range- -40 F to 140 F (-40 C to 60 C)
- Wiring Capacity- 14-8 AWG
- Terminal Type- Screw
- Environmental Rating- Type 4X, IP 66 / IP 67
- Listings- UL, CSA
The 63-38047 provides optimum safety by eliminating exposure to arc flash. The durable construction helps lower replacement costs, making for a cost effective solution. The design of the Meltric Decontactor DSN series of power connectors is lightweight and space saving. It is perfect for wet or washdown applications in industrial environments due to the water tight construction when attached to the correct Meltric female receptacle. This circular connector also has plug and play capability for a fast, easy disconnect, making for efficient operation by creating less downtime.
Silver nickel contacts: 85% silver, 15% nickel combination. Provides a durable and highly conductive contact point. Oxidation will not greatly affect its contact resistance or performance. Withstands repeated connecting and disconnecting
Lockout tagout capability: A 5/16" hole in the plug housing makes it simple to use a padlock on the plug if needed, in order to keep it from being inserted into a receptacle.
Meltric DSN Series User Manual
Meltric DSN30 30A, 277/480V, 3 Pole + Neutral + Ground Male Inlet
