The Macromatic TD-80224-44 is an On Delay Time Delay Relay. This programmable plug-in relay has an input voltage of 48V AC/DC at 50/60Hz and 10A DPDT output contacts. The timing ranges are digitally selected by 10 position binary DIP switch, from 1 to 1023 minutes. The TD8022444 uses an 8 pin 70169-D octal socket. It features an LED indicator to show the current status of the relay. It shows green when the power is on, and red once the relay is energized. Note: Image is for reference, actual part may differ

Specifications

Function- On Delay
Timing Range- 10 - 10230 Minutes
Input Voltage- 48V AC/DC
Output- 10A DPDT
Voltage Tolerance- AC Operation: +10/-15% of nominal at 50/60 Hz.
DC Operation: +10/-15% of nominal.
Load- 2VA
Setting Accuracy- Constant Voltage/Temp: The greater amount of +/- 0.1% of set time or +/-50ms, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 50ms.
Repeat Accuracy- Constant Voltage/Temp: The greater amount of +/-0.1% of set time or +/-0.02 sec, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 0.02 sec.
Reset Time- 0.1 Seconds
Start Up Time- 0.05 Sec
Maintain Function Time- 0.01 Sec
Insulation Voltage- 2000 V
Operating Temperature- -28 C to 65 C (-18 F to 150 F)
Storage Temperature- -40 C to 85 C (-40 F to 185 F)
Output Contacts- DPDT 10A @ 240V AC/30V DC,
1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120V AC (N.C.)
B300 & R300, AC15 & DC13
Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
Dimensions- 2.4" Height x 1.7" Width x 3" Depth
Approvals- UL recognized, CE, CSA, UL listed (with Socket)

The On Delay function means that the time delay starts along with the input voltage, and the output becomes energized once the time delay stops. In order for the time delay to be reset, or to de-energize the output, the input voltage needs to be taken out. Each DIP switch is labeled with a time increment. Move the necessary switches to the ON position and add up their labeled values to set the time delay. For example, to set the time delay for 6000 minutes (100 hours), the switches for 80, 160, 640, & 5120 would be moved to the ON position.

Macromatic TD-8 Series Relay Installation Instructions

Explanation of Macromatic Time Delay Relay Timing Functions

Macromatic TD-8 Series Time Delay Relay Competitive Comparison

48V AC/DC 10-10230 Minute Plug In Time Delay Relay TD-80224-44