 |
 |
 |
|
LiteCycle SG-PB-3001-R 1-Position Push Button Switch Box Enclosure, Emergency Red
1-Position LiteCycle push button enclosure, PBT Plastic base, 30 mm pushbutton opening, Red Molded Resin faceplate, black housing, IP65.
Why Choose the LiteCycle SG-PB-3001-R Push Button Enclosure?
The LiteCycle SG-PB-3001-R is a 1-position push button switch box enclosure made for industrial control stations. It uses a PBT plastic base with one 30 mm pushbutton opening and a red molded resin faceplate.
This enclosure is suited for emergency stop stations on machinery, panels, and automated equipment. The emergency red faceplate helps operators identify an E-stop control quickly. Counter-rotating locks, molded knockouts, and an oil-resistant construction help simplify installation and keep the enclosure easier to clean in demanding environments. The IP65 rating supports use where dust and water protection are required.
🔘 1 Control Position
Provides one pushbutton mounting point in one enclosure
📏 30 mm Pushbutton Entry
Accepts compatible 30 mm push buttons for machine control stations
🎯 Emergency Red Faceplate
Improves visibility for emergency stop applications
🧰 PBT Plastic Base
Handles high-temperature environments and resists oil during cleaning
⚠️ Confirm Push Button Fit Before Ordering
Before ordering, confirm the number of control positions, the 30 mm entry size, wire-entry knockout requirements, available panel space, and accessory compatibility. This item is an enclosure for push button controls; verify that the specifications meet the needs of the application.
📋 Typical Applications
Emergency Stop Stations: Use the red faceplate for E-stop controls that need to stand out on equipment.
Machine Safety Controls: Mount a compatible 30 mm operator where quick access is required.
Panel-Mounted Control Points: Use the compact enclosure where a separate control box is needed near the machine.
Key Features & Benefits
- 1-Position design for organized operator control mounting
- 30 mm pushbutton entrance size
- Red Molded Resin faceplate for clear visual identification
- Black housing base color
- PBT Plastic base material
- Counter-rotating locks for secure closure
- Molded knockout / entry support: Molded Knockout
- IP65 ingress protection rating
- Oil-resistant construction for easier cleaning
- Suitable for high-temperature industrial environments
- Useful for machinery, automation panels, and local operator controls
Technical Specifications
|
LiteCycle Part Number
|
SG-PB-3001-R
|
|
Dimensions
|
90 mm L x 80 mm W x 70 mm H (3.54" x 3.15" x 2.76")
|
|
Housing Color
|
Black
|
|
Base Material
|
PBT Plastic
|
|
Face Plate
|
Red Molded Resin
|
|
Push Button Entry
|
30 mm
|
|
Wire Entry
|
Molded Knockout
|
|
Entry Opening
|
22 mm
|
|
Maximum Size
|
PG 13.5
|
|
Positions
|
1
|
|
Ingress Protection
|
IP65
|
📋 Basic Installation Overview
1. Confirm Layout: Verify the 1 control position, enclosure dimensions, and available mounting space before installation.
2. Match Operators: Use compatible 30 mm operators and contact blocks for the control function.
3. Prepare Wiring Entry: Open only the molded knockout or entry point needed for the cable gland or conduit fitting.
4. Route and Secure Wiring: Route wiring cleanly through the enclosure and keep conductors protected from sharp bends or pinch points.
5. Check Closure: Close the enclosure with the counter-rotating locks and confirm the faceplate is secure before operation.
Always follow the machine builder’s wiring requirements and applicable electrical safety practices before installing or servicing push button controls.
📦 Enclosure Selection Resource
Use the Industrial Enclosure & Junction Box Selector to compare LiteCycle enclosure styles, sizes, materials, and entry configurations before selecting replacement or new-installation parts.
Industrial Enclosure & Junction Box Selector
📞 Product Fit Notes
Fit Reminder:
LiteCycle SG-PB-3001-R is an enclosure body for compatible push button controls. Match the operator diameter, contact blocks, wire-entry hardware, and environmental rating to the machine before installation.
|
|
|
 |
|
 |
|
