 |
 |
 |
|
LiteCycle SG-AL-30P Aluminum Terminal Enclosure, 30 Circuits, 60 Terminations, IP67, 120V AC
Cast aluminum LiteCycle terminal enclosure for control wiring junctions, 30 circuits, 60 terminations, IP67 protection, and 120V AC rating.
Why Choose the LiteCycle SG-AL-30P Terminal Enclosure?
The LiteCycle SG-AL-30P is a cast aluminum terminal enclosure designed to support 30 control circuits with 60 terminations. Its enclosure measures 125 mm Width x 190 mm Length x 80 mm Height (4.92" x 7.48" x 3.15"), giving machine builders and maintenance teams a defined housing size for protected junction wiring. This model is rated for 120V AC and 15A service.
The enclosure uses a cast aluminum base and cast aluminum cover to protect the integrated terminal block in industrial control applications. Molded mounting dimensions, pre-tapped screw bosses in the base, and a tapped cover boss for grounding help simplify installation and service. It accepts 14-20 AWG conductors. Grounding is handled through a screw boss for M4. The IP67 rating helps protect wiring from dust and temporary water exposure.
🔌 30 Circuits
Supports organized control wiring inside one protected terminal enclosure
🧰 60 Terminations
Provides secure terminal points for machine and panel wiring connections
🛡️ IP67 Protection
Helps protect wiring junctions from dust, moisture, and plant-floor exposure
⚙️ 14-20 AWG
Designed for common industrial control wiring and junction box applications
⚠️ Confirm Enclosure Size and Wiring Requirements
Before ordering, confirm the enclosure dimensions, circuit count, termination count, conductor size, voltage rating, current rating, grounding method, and required environmental rating for your installation.
This model supports 30 circuits and 60 terminations. Select a larger enclosure if the wiring layout requires additional service space or future expansion.
📋 Common Applications
The LiteCycle SG-AL-30P is used in welding, robotics, machinery, automotive equipment, gas supply facilities, and petrochemical plant environments where control wiring needs a protected junction point. The integrated terminal block supports clean wiring trunking and helps reduce loose field connections inside panels, machines, and equipment enclosures.
Key Features & Benefits
- 30 circuit capacity for organized control wiring
- 60 terminations for field wiring connections
- Accepts 14-20 AWG conductors
- Cast aluminum base with cast aluminum cover
- IP67 ingress protection for dust and temporary water exposure
- Rated for 120V AC service
- 15A input current rating
- Grounding through screw boss for M4
- Pre-tapped screw bosses in the base support secure mounting
- Two screws on each terminal allow each side to be wired independently
- CE, UL 508A approvals
Technical Specifications
|
Dimensions
|
125 mm Width x 190 mm Length x 80 mm Height (4.92" x 7.48" x 3.15")
|
|
Housing Color
|
Gray
|
|
Base Material
|
Cast Aluminum |
|
Cover Material
|
Cast Aluminum |
|
Connection Capacity
|
14-20 AWG
|
|
Grounding
|
Screw Boss for M4
|
|
Terminations
|
60
|
|
Circuits
|
30
|
|
Rated Voltage
|
120V AC
|
|
Rated Frequency
|
60 Hz
|
|
Input Current
|
15A
|
|
Ingress Protection
|
IP67
|
|
Approvals
|
CE, UL 508A
|
📋 Basic Installation Overview
1. Confirm Location: Check that the enclosure footprint works for the machine, panel, or junction point and that there is enough room for conduit, cable entry, and service access.
2. Verify Ratings: Match the installation to the listed voltage, current, conductor size, approvals, and ingress protection rating before wiring the enclosure.
3. Plan Terminations: Use the integrated terminal block to organize incoming and outgoing conductors, keeping each circuit labeled and serviceable.
4. Mount Securely: Use the molded mounting dimensions and screw boss locations to position and secure the enclosure according to the application requirements.
5. Check Sealing: Inspect the cover, gasket area, and cable entries before operation to help maintain the environmental rating.
Always follow applicable electrical codes and the product documentation for the LiteCycle SG-AL-30P enclosure.
✅ Quick Selection Check
Product: LiteCycle SG-AL-30P
Dimensions: 125 mm Width x 190 mm Length x 80 mm Height (4.92" x 7.48" x 3.15")
Circuits / Terminations: 30 circuits / 60 terminations
Voltage / Current: 120V AC / 15A
Protection Rating: IP67
|
|
|
 |
|
 |
|
