Upgrade Post Top & Bollard Lights with LED Corn Cob Lamps

💡 Upgrade Post Top & Bollard Light Fixtures with LED Corn Cob Lamps (Save Energy + Simplify Inventory)

Cut energy use by up to 60% while improving lighting performance.

⚠️ Before You Retrofit:
  • Check to see if you need to bypass the ballast (direct wire required)
  • Verify fixture dimensions. Even compact LEDs need clearance
  • Check for proper ventilation or cooling (lights with fans require airflow)

1️⃣ Where These LED Corn Cob Lamps Work Best

🏙️ Post Top Fixtures

  • Parking lots
  • Roadways
  • Campus pathways
  • Street lights
  • Decorative poles

🚶 Bollard Fixtures

  • Walkways
  • Entrances
  • Commercial landscaping
  • Perimeter lighting

2️⃣ Key Performance Upgrades

📏 Compact Fit

Smaller size lamps can fit tight enclosures without modification.

🌡️ Active Cooling

Built-in fan extends lifespan (typically 50,000+ hours).

⚡ Surge Protection

Integrated protection reduces failure from voltage spikes.

🛡️ Sealed Housing

Resistant to dust & insects for outdoor reliability.

3️⃣ Flex Color = Faster Installs

🎯 One Lamp, 3 Color Options:

  • 3000K (Warm White)
  • 4000K (Neutral White, default setting)
  • 5000K (Daylight)

Switch color temperature on-site, there's no need to have multiple bulbs on hand.

Color Temp Appearance Best Use
3000K Warm Decorative areas
4000K Neutral General outdoor lighting
5000K Bright White Security & visibility

4️⃣ Wattage & Replacement Guide

🔌 Post Top Lamps
  • 35W / 45W / 65W / 95W
  • Replaces approximately 100W-400W HID
🔌 Bollard Lamps
  • 11W / 14W / 18W / 24W
  • Ideal for low-height fixtures
💡 Tip: Upgrading from HID to LED typically reduces energy costs by 40–60% and greatly reduces maintenance cycles.

📌 Quick Retrofit Checklist

  • ✔ Confirm base type (E26 / E39)
  • ✔ Measure fixture clearance (height & diameter)
  • ✔ Bypass ballast if needed (direct wire)
  • ✔ Select correct wattage for lumen needs (if Flex Watt)
  • ✔ Set desired color temperature or wattage (if Flex Color)

🛠️ Emergency & Troubleshooting

  • Light won’t turn on: Check ballast bypass wiring and input voltage (120–277V typical)
  • Flickering: Confirm stable power source or replace failing surge protector
  • Overheating: Ensure fixture is not fully enclosed without airflow
  • Wrong color output: Verify switch position on Flex Color models

🔗 Upgrade Your Lighting System Today

Browse compatible retrofit options and fixtures:

LED Corn Cob Bulbs | LED Lighting | Industrial LED Light Fixtures