 |
 |
 |
|
The Kacon T16-312 maintained push button has a round, flush head with a DPDT contact arrangement & metal chassis. Made for 16 mm (5/8") mounting holes. Contacts are 24K gold plated alloy, rated at 1A & 120VAC.
Not illuminated. Rated IP 65. Maintained push buttons remain in a constant state until they are pressed, which changes the state until they are pressed again.
Specifications
- Push Button Type- Maintained
- Contact Arrangement- DPDT
- Contact Material- 24K Gold Plated Alloy
- Overall Dimensions- 40.4mm L x 21.6mm W x 19mm H
- Contact Resistance- Max 50 mOhm
- Insulation Resistance- Min 100 MOhm at 500V DC
- Dielectric Strength- 2000V AC for 1 min
- Vibration Resistance- 5-55Hz dual amplitude: 0.75mm
- Shock Resistance- Operation: 200m/s2 Endurance: 500m/s2
- Lifespan- Mechanical: Min 250,000 Electrical: Min 50,000
- Frequency of On/Off- 1200 times/hr
- Ambient Temperature- Operation: -25 C to 55 C (-13 F to 131 F) Storage: -30 C to 80 C (-22 F to 176 F)
- Ambient Humidity- 45-85% RH (at -5 to 40 C)
- Terminal Soldering Temperature- 20W 5 Sec / 260 C 3 Sec
- Rated Insulation Voltage- 250V AC
- Max Switching Current- 3A Max
- Max Switching Voltage- 250V AC, 110V DC
- Rated Current- 1A 24V DC / 120V AC, 0.5A 250V AC
- Min Applicable Load- 1mA 5V DC
- Degree of Protection- IP 65
- Approvals- UL & CUL Recognized, CE
If you need the push button to perform certain functions, such as having timed on/off cycles, it does require the use of a relay, which is sold separately. Please contact us for more information on Kacon relays
Kacon 16 mm DPDT Maintained Metal Push Button T16-312
|
|
|
 |
|
 |
|
