 |
 |
 |
|
The Kacon KSR5030ZAHF high voltage single phase solid state relay has an input voltage of 220V AC & a load voltage of 90-480V AC. Load current of 30A. Features an LED indicating the status of the control input and an over temperature alarm output. LED is green under normal conditions or red to indicate overheating. Alarm feature is made to be connected to an external alarm device. Comes with attached heatsink and cooling fan
Note: Image is for reference, actual part may differ.
Specifications
- Overall Dimensions- 100 mm Height x 30 mm Width x 100 mm Depth (3.94" x 1.18" x 3.94")
- Fan Dimensions- 30 mm Height x 30 mm Width x 10 mm Depth (1.18" x 1.18" x 0.4")
- Input Voltage- 220V AC
- Operation Mode- Zero Cross
- Load Current- 30 Amps
- Load Voltage- 90-480V AC (Rated load voltage 440V AC)
- Rated Control Voltage- 220V AC
- Control Voltage Range- 90-240V AC
- Pick-Up Voltage- Less than 90V AC
- Drop-Out Voltage- More than 50V AC
- Input Current- 0.01 Amps (+/- 0.005 Amps)
- Load Current Range- 0.5 Amps (at 25 C / 77 F)
- Peak Voltage- 1200V
- Single Cycle Surge Current Resistance- 370, 60Hz 1 Cycle
- Alarm Output- NPN Open Collector, Opens when the relay temperature is at 95 C / 203 F (+/- 5)
- Alarm Max. Switching Current Rating- 50mA DC
- Alarm Voltage Drop- 2.8V DC (Typical), 4V DC (Maximum)
- Release Time- Cycle of 1/2 load + less than 1 millisecond
- Output Voltage on Drop- Less than 1.8V (RMS)
- Leakage Current- Less than 0.02 Amps (480V AC)
- Insulation Resistance- More than 100 MOhms (500V DC)
- Withstand Voltage- 5000V AC 50/60Hz, 1 min
- Vibration Resistance- 10-55-10Hz Peak Amplitude 0.35mm (Dual Amplitude 0.7mm)
- Shock Resistance- 294m/s2
- Storage Temperature- -30 C to 100 C (-22 F to 212 F)
- Ambient Temperature- -30 C to 80 C (-22 F to 176 F)
- Ambient Humidity- 45-85% Relative Humidity
- Approvals- CE
220V 30 Amp High Voltage Single Phase SSR with Fan KSR5030ZAHF
|
|
|
 |
|
 |
|
