 |
Hirschmann GMNL 209 NJ GB1 Black Solenoid Valve Connector with center screw (P/N: 933399-100). The GMNL 209 DIN 43650 (EN 175301-803) Form B connector has 2 Poles + Ground, a 10 mm Pin Spacing, black fiberglass reinforced polyamide housing, and a PG 9 cable entry which accommodates 4.5 mm to 7 mm cable. Hardwired. Type of connection: screw termination. The rugged GMN-series rectangular connectors are water and dust proof to IP 65 standards. The versatile GMNL 209 NJ GB1 is a tailored industrial connector useful for nearly every application in which hydraulic, pneumatic and electro-magnetic actuators are needed to provide dependable service. Used primarily as a solenoid valve or sensor connector. The rectangular connectors of the GMN-series are well-equipped to handle the heavy stresses in field operation.
What's Included: (1) GMNL 209 NJ GB1 Black Connector & (1) Center Screw.
- Has a bridge rectifier with varistor (MOV surge suppression)
- Bridge rectifier converts AC input into DC output
- MOV suppression gives overvoltage protection to the source and load
- Installation-friendly
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UL, SEV, UR, CSA approvals
- For voltages up to 250 VAC and for currents up to 1 Amps
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color: Black
- Type of Contact: screw / cable shoe / cable eye
- Contact Spacing: 10 mm
- Number of Poles: 2 Poles + Ground
- Housing Dimensions: 32mm Height x 40mm Length x 20.8mm Width (1.26" x 1.57" x 0.82")
- Cable Entry: PG 9 (4.5 to 7 mm cable O.D.)
- Circuit: 230V AC/DC MOV Suppression + Bridge Rectifier
- Maximum Conductor Size: 16 AWG
- Gasket: No Gasket
- Nominal Current: 230 V / 1 amp
- Operating Temperature: -13 F to +194 F
- Protection Class: IP 65 (total protection from dust & low pressure water jets from any direction)
- Contact Resistance: <= 10 mOhm
- Insulation Resistance: > 10 ^ 9 Ohm
- Contact Surface Material: Copper/Tin
- Contact Bearer Material: Glass Fiber Reinforced Polyamide
- Housing Material: Glass Fiber Reinforced Polyamide
- Inflammability Class Housing: 94 HB
- Inflammability Class Contact Bearer: 94 HB
- Approvals: UR, UL 1977, VDE, SEV, CSA, ROHS
|
|
|
