 |
DIN 43650 Form A
Hirschmann GDM 2011 J Black Solenoid Valve Connector with center screw and 3-21 Flat Gasket
Industrial solenoid valve connector with 2 Poles + Ground, 18 mm pin spacing, PG 11 - Accommodates 6 mm to 9 mm cable cable entry, and IP 65 protection.
✓ Form A Solenoid Valve Connector - Built for Industrial Automation
Connection: screw termination / cable shoe / cable eye | Rating: 250 VAC / 16 amps | Protection: IP 65
Overview
Hirschmann GDM 2011 J Black Solenoid Valve Connector with center screw and 3-21 Flat Gasket (P/N: GDMZRB21103210, Hirschmann order code: 932106-100 + 731739-004) The GDM 2011 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, black fiberglass reinforced polyamide housing, and a PG 11 cable entry which accommodates 6 mm to 9 mm cable. Hardwired. Type of connection: screw termination. The GDM-series durable rectangular connectors can stand up to high loads, and are dust and hose-proof to IP 65 standards. The GDM 2011 J Black is a tailored versatile industrial connector that can be used for nearly any application where hydraulic, pneumatic and electro-magnetic actuators have to provide dependable service. Mainly used as a solenoid valve or sensor connector. The rectangular connectors of the.
2 Poles + Ground18 mmIP 65
Designed for hydraulic, pneumatic, electromagnetic actuator, sensor, and control wiring, this Hirschmann GDM-series connector provides a reliable hardwired interface for demanding field installations.
💡 Industrial Form A Connection
DIN 43650 / ISO 4400 Format: Standard Form A interface for solenoid valves and industrial devices.
Field Wiring Ready: screw termination / cable shoe / cable eye accepts direct wiring for installation flexibility.
Protected Housing: IP 65 protection helps resist dust and water in industrial environments.
Key Features
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Screw termination - wires directly to the screw terminal
- Protection class up to IP 65
- Note : See images for drawings
✅ Why Choose This DIN Connector?
This connector combines a rugged Hirschmann GDM housing, standard Form A geometry, and practical field wiring features for dependable solenoid valve, actuator, and sensor connections.
Applications
Use this DIN 43650 Form A connector for industrial automation applications that require secure valve and device wiring:
- Solenoid valves
- Hydraulic and pneumatic actuators
- Pressure sensors and flow controllers
- Industrial automation control panels
- Conveyor, machine, and field wiring installations
⚠️ Important Installation Info
Verify wiring before energizing.
Use within rated voltage, current, and temperature limits.
Protection ratings depend on proper assembly, cable fit, and sealing components.
Performance Benefits
- Supports dependable solenoid valve and actuator connections
- Standard Form A layout simplifies replacement and maintenance
- Rugged polyamide construction helps withstand field use
- Approvals support use in industrial control applications
🔧 Replacement & Maintenance Tip
Match the pole count, contact spacing, cable entry, gasket style, and center screw before replacing an existing DIN connector.
Specifications
|
Brand
|
Hirschmann
|
|
Product Code
|
GDMZRB21103210
|
|
Vendor / Order Code
|
932106100 + 731739004
|
|
Connector Type
|
DIN 43650 / ISO 4400 Form A
|
|
Poles
|
2 Poles + Ground
|
|
Contact Spacing
|
18 mm
|
|
Housing Color
|
Black
|
|
Cable Entry
|
PG 11 - Accommodates 6 mm to 9 mm cable
|
|
Termination
|
screw termination / cable shoe / cable eye
|
|
Center Screw
|
M3 x 35
|
|
Gasket
|
GDM 3-21: Flat EPDM- Resists fuel oil, high/low temps, aging, impervious to gas
|
Electrical
|
Nominal Current / Voltage
|
250 VAC / 16 amps
|
|
Contact Resistance
|
<= 4 mOhm
|
|
Operating Temperature
|
-40 F to +257 F
|
Physical
|
Housing Dimensions
|
34.2mm H x 53mm L x 27.5mm W
|
|
Maximum Conductor Size
|
16 AWG
|
|
Contact Surface Material
|
Sn
|
|
Contact Bearer Material
|
PA
|
|
Contact Bearer Housing
|
PA
|
Environment & Certifications
|
Protection Class
|
IP 65
|
|
Approvals
|
UR, VDE, SEV, CSA, CE, ROHS
|
|
Inflammability Class Housing
|
94 HB
|
|
Inflammability Class Contact
|
94 V0
|
What's Included
- (1) GDM 2011 J Black Connector
- (1) M3 x 35mm Nickel Plated Brass Center Screw
- (1) 3-21 EPDM Flat Gasket
|
|
|
