 |
Hirschmann GDM 3009 J Black Solenoid Valve Connector with center screw and 3-21 Flat Gasket
GDM 3009 J DIN 43650 / ISO 4400 Form A solenoid valve connector with 3 poles + ground, 18 mm contact spacing, and PG 9 cable entry for hydraulic, pneumatic, and electromagnetic actuator wiring.
Why Choose the GDM 3009 J Form A Connector?
The GDM 3009 J is built for DIN 43650 / ISO 4400 Form A valve and sensor connections in industrial equipment. Its black fiberglass reinforced polyamide housing, 18 mm pin spacing, and screw termination / cable shoe / cable eye connection design make it a practical hardwired connector for solenoid valves, pressure sensors, flow controllers, gas appliance controls, oil burner controls, conveyor equipment, and mobile machinery.
This version uses a PG 9 - Accommodates 4.5 mm to 7 mm cable and supports 16 AWG conductors. The connector is rated for 250 VAC / 16 amps, protected to IP 65, and approved for UR, VDE, SEV, CSA, CE, ROHS.
🔌 DIN Form A Layout
3 Poles + Ground, 18 mm spacing for DIN 43650 / ISO 4400 valve interfaces
🧰 Screw Termination
screw termination / cable shoe / cable eye supports field wiring with a large pinplate connection area
🛡️ IP65 Protection
IP 65 housing protection for dust and hose-proof industrial use
⚙️ Cable Entry
PG 9 entry for 4.5-7 mm cable
⚠️ Confirm Form A Fit Before Ordering
Verify the valve interface,
18 mm contact spacing, cable entry, conductor size, gasket requirement, and center screw length before installation. This connector is made for DIN 43650 / ISO 4400 Form A connections and should be matched to the correct solenoid valve or sensor port.
The included EPDM flat gasket is suited for fuel oil resistance, gas impermeability, aging resistance, and high/low temperature exposure.
📋 Application Fit
Use this connector for industrial valve and sensor wiring where a rugged DIN Form A field connection is required.
Typical uses: solenoid valves, pressure sensors, flow controllers, hydraulic actuators, pneumatic actuators, electromagnetic actuators, oil burner controls, gas appliance controls, conveyor systems, construction machinery, and vibration-prone equipment.
Installation-friendly, thanks to a large pinplate cable connecting area
High flexibility in terms of cable diameter and length
No compromises in safety: international VDE, UR, CSA, GL approvals
Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
For voltages up to 400 VDC and for currents up to 16 Amps
Protection class up to IP 65
Key Features & Benefits
- 3 Poles + Ground with 18 mm contact spacing
- PG 9 - Accommodates 4.5 mm to 7 mm cable
- screw termination / cable shoe / cable eye connection for hardwired installations
- EPDM flat gasket included
- 250 VAC / 16 amps nominal current rating
- IP 65 protection class
- -40 F to +257 F operating temperature range
- Large pinplate cable connection area for easier installation
Technical Specifications
|
Product Code
|
GDMZRB3903210
|
|
Hirschmann Order Code
|
932214-100 + 731739-004
|
|
Brand
|
Hirschmann
|
|
Series / Model
|
GDM 3009 J
|
|
Connector Standard
|
DIN 43650 / ISO 4400 / EN 175301-803
|
|
Form Factor
|
Form A Solenoid Valve Connector
|
|
Housing Color
|
Black
|
|
Number of Poles
|
3 Poles + Ground
|
|
Contact Spacing
|
18 mm
|
|
Type of Contact
|
screw termination / cable shoe / cable eye
|
|
Cable Entry
|
PG 9 - Accommodates 4.5 mm to 7 mm cable
|
|
Maximum Conductor Size
|
16 AWG
|
|
Center Screw
|
M3 x 35
|
|
Gasket
|
GDM 3-21: Flat EPDM- Resists fuel oil, high/low temps, aging, impervious to gas
|
|
Nominal Current
|
250 VAC / 16 amps
|
|
Operating Temperature
|
-40 F to +257 F
|
|
Protection Class
|
IP 65
|
|
Housing Dimensions
|
34.2mm H x 51mm L x 27.5mm W
|
|
Contact Resistance
|
<= 4 mOhm
|
|
Contact Surface Material
|
Sn
|
|
Contact Bearer Material
|
PA
|
|
Contact Bearer Housing
|
PA
|
|
Inflammability Class Housing
|
94 HB
|
|
Inflammability Class Contact
|
94 V0
|
|
Approvals
|
UR, VDE, SEV, CSA, CE, ROHS
|
📋 Basic Installation Overview
1. Confirm Interface: Match the connector to a DIN 43650 / ISO 4400 Form A valve or sensor with 18 mm contact spacing.
2. Prepare Cable: Use cable that fits the PG 9 - Accommodates 4.5 mm to 7 mm cable and does not exceed the 16 AWG conductor size rating.
3. Wire Terminals: Terminate conductors using the screw termination / cable shoe / cable eye connection method shown in the product drawing.
4. Seat Gasket: Install the correct gasket at the valve interface to maintain the intended seal.
5. Secure Center Screw: Tighten the M3 x 35 center screw and inspect the assembly for proper seating before energizing the circuit.
Always follow the Hirschmann drawing, equipment manual, and applicable electrical codes before operation.
📦 What's Included
- GDM 3009 J DIN 43560 Connector
- EPDM Flat Gasket
- Center Screw
📞 Product Support
Need to match a DIN 43650 Form A connector?
Confirm the valve form, pin spacing, cable entry, gasket style, conductor size, current rating, voltage rating, protection class, and approval requirements before ordering.
For replacement applications, compare the product drawing, housing height, cable entry range, gasket type, and center screw size against the connector currently installed on the equipment.
|
|
|
