 |
DIN 43650 Form A • IP65
Hirschmann GDM 2014 J Black Solenoid Valve Connector with center screw and 3-7 Flat Gasket
Hardwired Form A connector for solenoid valve, sensor, and actuator wiring with 2 Poles + Ground, 18 mm contact spacing, and 1/2" NPT - Accommodates 6 to 13 mm cable O.D..
✓ Form A DIN 43650 Valve Connector: Built for Reliable Field Wiring
Best fit: solenoid valves, sensors, hydraulic actuators, pneumatic actuators, and industrial control equipment
Overview
The
GDMZRB2140370 is a Hirschmann GDM 2014 J Form A solenoid valve connector for hardwired valve, sensor, and actuator connections. It uses screw termination / cable shoe / cable eye with 2 Poles + Ground, 18 mm contact spacing, and a black fiberglass reinforced polyamide housing.2 Poles + GroundIP 651/2" NPTGasket Included
Use this connector when a field device needs a compact rectangular DIN connection with dependable sealing and service access. The 1/2" NPT cable entry, which accommodates 6 to 13 mm cable O.D., helps match the connector to the cable or conduit path while the center screw secures the assembly to the valve or device interface.
🔌 Rugged Valve & Sensor Connection
Connection: screw termination / cable shoe / cable eye
Cable Entry: 1/2" NPT - Accommodates 6 to 13 mm cable O.D.
Rating: 250 VAC / 16 amps with IP 65 protection
Key Features
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Protection class up to IP 65
- 1/2" NPT - Accommodates 6 to 13 mm cable O.D. cable entry for matching cable or conduit requirements
- Accepts conductors up to 16 AWG
- GDM 3-7: Flat NBR/Buna-N - Resists most oils & many acids sealing configuration
- Approvals include UR, VDE, SEV, CSA, CE, ROHS
✅ Why Choose This Connector?
This Hirschmann GDM connector is built for industrial field wiring where valves, sensors, and actuators need a secure DIN 43650 Form A interface that can handle plant-floor vibration, moisture, and maintenance cycles.
Applications
Use this Form A connector anywhere a hydraulic, pneumatic, or electromagnetic field device requires a hardwired DIN valve connection.
- Solenoid valve and sensor connections
- Hydraulic and pneumatic actuator wiring
- Pressure sensors and flow controllers
- Heating equipment in gas appliance or oil burner control systems
- Conveyor systems, construction machinery, and vibration-exposed equipment
⚠️ Important Installation Info
Cable fit matters: 1/2" NPT - Accommodates 6 to 13 mm cable O.D.
Seal check: GDM 3-7: Flat NBR/Buna-N - Resists most oils & many acids
Review the product drawing and device requirements before installation.
Performance Benefits
- Secure DIN interface for valves, sensors, and industrial actuators
- Large pinplate cable area supports easier field termination
- IP65 protection helps defend against dust and hose-directed water
- Approvals support use in demanding industrial control applications
🔎 Connector Selection Tip
Match the DIN form, contact spacing, number of poles, cable entry, gasket style, voltage/current rating, and protection class before replacing an existing connector.
Specifications
|
Brand
|
Hirschmann
|
|
Model
|
GDM 2014 J
|
|
Part Number
|
GDMZRB2140370
|
|
Order Code
|
932107-100 + 730801-002
|
|
Type
|
DIN 43650 / ISO 4400 Form A Solenoid Valve Connector
|
|
Housing Color
|
Black
|
|
Connection Style
|
Hardwired
|
Connector Details
|
Number of Poles
|
2 Poles + Ground
|
|
Contact Spacing
|
18 mm
|
|
Type of Contact
|
screw termination / cable shoe / cable eye
|
|
Cable Entry
|
1/2" NPT - Accommodates 6 to 13 mm cable O.D.
|
|
Maximum Conductor Size
|
16 AWG
|
|
Center Screw
|
M3 x 35
|
|
Gasket
|
GDM 3-7: Flat NBR/Buna-N - Resists most oils & many acids
|
Electrical
|
Nominal Current
|
250 VAC / 16 amps
|
|
Contact Resistance
|
<= 4 mOhm
|
|
Contact Surface Material
|
Sn
|
Physical
|
Housing Dimensions
|
34.2mm H x 57mm L x 27.5mm W
|
|
Contact Bearer Material
|
PA
|
|
Contact Bearer Housing
|
PA
|
Environment
|
Operating Temperature
|
-40 F to +257 F
|
|
Protection Class
|
IP 65
|
|
Inflammability Class Housing
|
94 HB
|
|
Inflammability Class Contact
|
94 V0
|
Certifications
|
Approvals
|
UR, VDE, SEV, CSA, CE, ROHS
|
What's Included
- (1) GDM 2014 J Black Connector
- (1) M3 x 35mm Nickel Plated Brass Center Screw
- (1) 3-7 Nitrile Flat Gasket
|
|
|
