Home > Sealant Tape & Leak Repair > EternaBond RoofSeal Tape >

EternaBond RSW-4-50 4" x 50' White RoofSeal Sealant Tape

EternaBond RoofSeal Leak Repair Tape
EternaBond RSW-4-50 4" x 50' White RoofSeal Sealant Tape


 
Alternative Views:


Our Price: $71.35
MFG P/N: EB-RW040-50R
MFG: EternaBond
Weight (lbs): 3

Quantity in Stock :8


Availability:
In Stock
Product Code: RSW-4-50
Qty:

Description
 

The EternaBond RSW-4-50 RoofSeal tape is white with a 50 foot length and a 4 inch width. Total thickness is 35 mil. RoofSeal is perfect for use outside as it has a UV stable backing. The high elongation factor allows RoofSeal to expand or contract with the surrounding conditions as they change.

  • Easy installation, only minimal amount of surface prep needed
  • Liquid tight seal
  • UV protection
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Common uses include roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Features MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Compatible with EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 4" x 50'
  • Color: White
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexbility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

White RSW-4-50 4" x 50' Leak Repair Tape

Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet