Home > Sealant Tape & Leak Repair > EternaBond RoofSeal Tape >

EternaBond RST-2-50 2" x 50' Tan RoofSeal Sealant Tape

EternaBond RoofSeal
EternaBond RST-2-50 2" x 50' Tan RoofSeal Sealant Tape
 
Alternative Views:
Price: $38.79
MFG P/N: EB-RT020-50R
MFG: EternaBond
Weight (lbs): 1



Availability: Currently Unavailable
Product Code: RST-2-50
Not Currently Available

Description
 

The EternaBond RST-2-50 RoofSeal tape is tan with a 50 foot length and a 2 inch width. Total thickness is 35 mil. RoofSeal has a UV protected backing, made for use in areas with a lot of sun. The high elongation factor allows it to expand or contract during changing conditions.

  • Simple installation, only a small amount of surface prep needed
  • Liquid tight seal
  • UV protected
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Used for roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Features MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Works on EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 2" x 50'
  • Color: Tan
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

Tan RoofSeal 50 Foot Tape RST-2-50
Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet