Boxco BC-CGP-192810 is a hinged lid enclosure. Back plates for mounting interior components, wall mounting brackets, and optional latch locks sold separately (see below). There is no need for a separate ring gasket, as the gasket is already molded around the lid of the enclosure. Holes can be drilled into the sides for cable glands if cables need to be run through the enclosure.

Dimensions (Width x Length x Depth): 7.48" x 11.02" x 3.94" (190 x 280 x 100 mm)
Polycarbonate (10% glass fiber reinforced base)
Solid gray cover
Molded hinges
Stainless steel latches
Built in key ring
UV resistant
-40 C to 110 C (-40 F to 230 F)
Rated IP 66/67, NEMA 4X
Flammability rating: UL94-V-0, 5VA, 94-HB
Impact test: IK07/08
UL508A, CE, TUV, RoHS

Boxco P Series Enclosure Downloads

Boxco Solid Gray Hinged Lid Enclosure, 190x280x100mm, Polycarbonate