 |
 |
 |
|
The Autonics SPA-030-24 is a switching mode Power Supply that can be used to change 100-240V AC input to 24V DC output. It is 1.5 Amp and 30 watts at 24 VDC. This power supply features several circuit protections, including over-current, inrush current, and short circuit. A green LED light indicates the output status. Note: Image is for reference, actual part may differ
Specifications
- Dimensions- 3.82" Width x 4.72" Length x 1.57" Height
- Output Power- 30W
- Output Voltage- 24V DC
- Input Voltage- 100-240V AC
- Input Frequency- 50/60 Hz
- Input Efficiency- Min 80%
- Input Current- Max 0.8 Amps
- Output Current- 1.5 Amps
- Voltage Adjustment Range- +/- 5%
- Input Variation- Max +/- 0.5%
- Load Variation- Max +/- 1%
- Ripple- Max +/- 1%
- Start Up Time- Max 150 milliseconds
- Hold Time- Min 10 milliseconds
- Inrush Current Protection- Max 20 Amps (100VAC)
- Over Current Protection- Min 110%
- Output Short Circuit Protection- Max 5 milliseconds
- Insulation Resistance- Over 100 MOhm
- Dielectric Strength- 3000VAC 5060 Hz for 1 min (between input & output terminals), 1500VAC 50/60 Hz for 1 min (between input terminals & F.G.)
- Vibration- 0.75mm amplitude at frequency of 10 to 55hz (for 1 min) in each X, Y, Z direction for 2 hours
- Shock- 300m/s2 (approx 30G) in each X, Y, Z direction for 3 times
- Electromagnetic Susceptibility- EN61000-6-2
- Electromagnetic Interference- EN61000-6-4
- Safety Standards- EN60950, EN50178
- Ambient Temperature- 14 F to 122 F
- Storage Temperature- -13 F to 149 F
- Ambient Humidity- 25 to 85% Relative Humidity
- Storage Humidity- 25 to 90% Relative Humidity
- Tightening Torque- 0.7 to 0.9 Nm
- Approvals- CE
|
|
|
 |
|
 |
|
