 |
 |
 |
|
AerosUSA 1731020116 SPP 16G Small Size Gray DES Cable Entry Split Cable Insert / Grommet, 16-17 mm Cable Range, Pack of 10
Small-size AerosUSA SPP 16G gray split DES cable entry grommet for 16-17 mm cables, with TPE construction, oil resistance, UV resistance, halogen-free material, and IP66 protection when used with the DES system.
Why Choose the AerosUSA 1731020116 SPP 16G DES Insert?
The AerosUSA 1731020116 SPP 16G small-size gray insert, or grommet, is made for DES cable entry frames and supports a 16-17 mm cable diameter range. It can be switched out with other SPP inserts to customize the frame for different cable sizes.
The split design allows cables with connectors to be inserted without removing the connector. The TPE body slides into the frame, resists oil and UV exposure, and is halogen and silicone free for industrial cable entry applications.
🧩 DES Frame Fit
Slides into DES cable entry frames for modular cable entry customization
🔌 Split Cable Entry
Accepts cables in the 16-17 mm range while allowing connectorized cables to pass through
🛢️ Oil & UV Resistant
TPE material resists oil and UV exposure in industrial environments
🛡️ IP66 DES System Rating
Supports dust-tight and high-pressure water jet protection when used with the DES system
⚠️ Confirm DES Frame and Cable Fit
This SPP insert is sold separately from the DES cable entry frame. Before ordering, match the SPP 16G size, 16-17 mm cable diameter range, cable quantity, and DES frame layout to the application.
For best sealing performance, install the insert according to the DES cable entry frame requirements and verify that the frame, insert, and cable layout match the enclosure opening.
📋 DES Insert Fit Overview
Small-size SPP inserts let the DES cable entry frame be configured around the cable sizes used in the machine or panel. The split grommet design allows terminated cables to be installed through the frame while helping maintain the seal around the cable jacket.
Key Features & Benefits
- Has split design so cables with connectors can be inserted
- Used with DES cable entry frame
- Resistant to oil
- Halogen & silicone free
- Insert slides into frame
- UV resistant
- Sold in packs of 10
Technical Specifications
|
Product Code
|
1731020116
|
|
Vendor Part Number
|
1731020116
|
|
Brand
|
AerosUSA
|
|
Series
|
SPP Small Size Insert
|
|
SPP Size
|
SPP 16G
|
|
Product Type
|
DES Cable Entry Split Insert / Grommet
|
|
Color / Material
|
Gray TPE (thermoplastic elastomer)
|
|
Cable Entries
|
1
|
|
Cable Diameter
|
0.63"-0.67" (16-17mm)
|
|
Temperature Range
|
-40 C to 110 C (-40 F to 230 F)
|
|
Dimensions
|
1.01" Width x 1.03" Height x 0.98" Depth
|
|
Flammability
|
UL 94 V0
|
|
IP Rating
|
IP 66 (Total protection from dust and high pressure water jets from any direction) when used with DES system
|
|
Approvals
|
NEMA 4X (indoor use), C UR US, Ecolab, RoHS Compliant
|
|
Package Quantity
|
Pack of 10
|
📋 Basic Installation Overview
1. Confirm Frame: Verify that the application uses a compatible DES cable entry frame and a small-size SPP insert position.
2. Check Fit: Confirm the cable outside diameter fits the 16-17 mm cable range before installation.
3. Place Insert: Open the split insert around the cable jacket without removing the existing connector.
4. Seat in Frame: Slide the insert fully into the DES frame so it sits evenly in the opening.
5. Inspect Seal: Check that the insert, frame, and enclosure opening are properly seated before the system is placed into service.
Always follow the DES cable entry frame installation instructions before operation.
📦 What's Included
• (10) AerosUSA SPP 16G small-size gray inserts / grommets
🔧 Application Notes
Use this insert when routing one cable through a DES cable entry frame and the cable outside diameter falls within the 16-17 mm range. It is useful for panel wiring, machine wiring, automation equipment, and retrofit work where connectorized cables need to pass through an enclosure wall.
|
|
|
 |
|
 |
|
