Menics PMEF-5FF-RYGBC 5 Stack LED Tower Light, 45mm Dia., 90-240V

Menics PMEF-5FF-RYGBC 5-Tier 45 mm LED Tower Light, 90-240V AC

Steady and flashing status indication with red/yellow/green/blue/clear lenses.

Why Choose the Menics PMEF-5FF-RYGBC Tower Light?

The Menics PMEF-5FF-RYGBC is a five-tier LED stack light rated for 90–240V AC. It combines red, yellow, green, blue, and clear lenses in one tower for visual equipment signaling, with steady and flashing light operation.

Prism-cut lenses distribute light more evenly across the 45 mm diameter tower. The PME series modular construction simplifies component replacement, and silver bands define each tier. Embedded vibration-absorbing rubber supports use in high-vibration areas. The light arrives preassembled with a 25-inch lead.

💡 Steady & Flashing

Use continuous illumination or flashing at 80 flashes per minute.

🔧 Modular Construction

Replace individual components when maintenance is needed.

🔍 Prism-Cut Lenses

Distribute light more evenly across the lens surface.

⚙️ Vibration-Absorbing Design

Embedded rubber helps the assembly accommodate vibration.

⚠️ Lead Length for Tall Mounting Poles

A 750 mm or 1000 mm mounting pole requires a longer lead than the standard 25-inch lead. The lead can be modified by the installer or by the factory upon request.

📋 Visual Signaling without a Buzzer

This model provides steady and flashing light signals and has no buzzer. Its IP52 rating provides protection from harmful dust deposits and water drops up to 15 degrees from vertical.

📋 Mounting Options

Pole mount: Use a pole and base.

Wall mount: Use a pole and wall bracket.

Surface mount: Use a 22 mm pole (MAP-0022) with a base, or a threaded 43 mm pole (MAP-M043). Insert the threaded pole through a predrilled hole and tighten it with lock nuts on both sides. Check the mounting accessory chart for compatible poles and bases.

📚 Mounting Accessories

Choose compatible mounting hardware using the Menics Signal Light Mounting Accessory Chart.

Technical Specifications

Brand	Menics
Model	PMEF-5FF-RYGBC
Light Operation	Steady and flashing
Power Supply	90-240V AC
Current Consumption	0.022 Amps (Red), 0.025 Amps (Yellow, Green, Blue, & Clear)
Lead Length	25"
LED Colors	Red/Yellow/Green/Blue/Clear
Number of LED Tiers	5 Stack
Lens Material	Polycarbonate Resin
Housing Material	ABS Plastic Resin
Flashing Rate	80 times per minute
Dimensions (Tower Light Only)	287 mm Height x 45 mm Diameter (11.3" x 1.77")
Brightness	6 Lumens, 480 mcd (Red), 9 Lumens, 720 mcd (Yellow), 9 Lumens, 720 mcd (Green), 2 Lumens, 160 mcd (Blue), 10 Lumens, 800 mcd (Clear)
Buzzer	None
Vibration	3 mm at 10–55 Hz
Ambient Temperature	-15°C to 40°C (5°F to 104°F)
Ambient Humidity	45-85% Relative Humidity
Recommended Wire Size	1007 UL / 22 AWG
IP Protection	IP52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
Approvals	CE, RoHS