 |
 |
 |
|
The Menics PWEZ-102-R 1 stack LED tower light has a low profile cream colored housing and is rated for 24V. It has a red lens, with a steady & flashing light and 85 dB alarm buzzer. Made for wall mounting, either horizontally or vertically. The signal light itself comes pre-wired with 800 mm (31.5") lead wire. Provides an equal brightness at any angle due to the reflective structure inside the lens. Vibration & moisture resistant. Useful in situations in which a pole mounted tower light would be impractical. Steady or flashing mode depends on how it is wired (see wiring diagram). Rated IP 56.
Specifications
- Mounting- Wall Mount
- Housing Material- White Plastic
- Lens Material- Polycarbonate Resin
- Light Operation- Steady & Flashing
- Power Supply- 24V AC/DC
- Current Consumption- 0.07 Amps, 0.03 Amps (Buzzer)
- LED Colors- Red
- Number of LED Tiers- 1 Stack
- Dimensions- 194 mm Height x 90 mm Width x 40 mm Depth (7.64" x 3.54" x 1.57")
- Brightness- 6 Lumens, 480 mcd (Red), 7 Lumens, 560 mcd (Yellow), 6 Lumens, 480 mcd (Green)
- Buzzer Volume- 85 dB
- Vibration- 3mm @ 10-55Hz
- Ambient Temperature- -15 C to 40 C (5 F to 104 F)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 56 (Partial protection from dust and high pressure water jets in any direction)
- Approvals- UL Listed, CE, RoHS
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
|
|
|
|
|
|
|
