 |
 |
 |
|
LiteCycle SG-AL-6P-R2 Aluminum Terminal Enclosure, 6 Circuits, 12 Terminations, IP67 / NEMA 12X, 120V
Cast aluminum LiteCycle terminal enclosure for control wiring junctions, 6 circuits, 12 terminations, IP67 / NEMA 12X protection, and 120V rating.
Why Choose the LiteCycle SG-AL-6P-R2 Terminal Enclosure?
The LiteCycle SG-AL-6P-R2 is a cast aluminum terminal enclosure designed to support 6 control circuits with 12 terminations. Its enclosure measures 70 mm W x 93 mm L x 52 mm H (2.75" x 3.66" x 2.05"), giving machine builders and maintenance teams a defined housing size for protected junction wiring. This model is rated for 120V and 15A service.
The enclosure uses a cast aluminum base and cast aluminum cover to protect the integrated terminal block in industrial control applications. A neoprene gasket in the cover helps seal the wiring area, and molded mounting dimensions inside the housing help simplify layout during installation. It accepts 14-20 AWG (0.5-2.5 mm²) conductors. The IP67 / NEMA 12X rating helps protect wiring from dust and temporary water exposure.
🔌 6 Circuits
Supports organized control wiring inside one protected terminal enclosure
🧰 12 Terminations
Provides secure terminal points for machine and panel wiring connections
🛡️ IP67 / NEMA 12X Protection
Helps protect wiring junctions from dust, moisture, and plant-floor exposure
⚙️ 14-20 AWG (0.5-2.5 mm²)
Designed for common industrial control wiring and junction box applications
⚠️ Confirm Enclosure Size and Wiring Requirements
Before ordering, confirm the enclosure dimensions, circuit count, termination count, conductor size, voltage rating, current rating, grounding method, and required environmental rating for your installation.
This model supports 6 circuits and 12 terminations. Select a larger enclosure if the wiring layout requires additional service space or future expansion.
📋 Common Applications
The LiteCycle SG-AL-6P-R2 provides a protected wiring junction for commercial wiring, robotics, machinery, automotive equipment, gas supply facilities, and solar installations. Its integrated terminal block helps organize field wiring inside a compact enclosure, while the IP67 / NEMA 12X rating supports use where dust, moisture, and temporary water exposure are concerns.
Key Features & Benefits
- 6 circuit capacity for organized control wiring
- 12 terminations for field wiring connections
- Accepts 14-20 AWG (0.5-2.5 mm²) conductors
- Cast aluminum base with cast aluminum cover
- IP67 / NEMA 12X ingress protection for dust and temporary water exposure
- Rated for 120V service
- 15A input current rating
- Neoprene cover gasket helps seal the wiring area
- Two screws for each terminal support secure wiring connections
- CE, UL 508A approvals
Technical Specifications
|
Dimensions
|
70 mm W x 93 mm L x 52 mm H (2.75" x 3.66" x 2.05")
|
|
Housing Color
|
Gray
|
|
Base Material
|
Cast Aluminum |
|
Cover Material
|
Cast Aluminum |
|
Connection Capacity
|
14-20 AWG (0.5-2.5 mm²)
|
|
Terminations
|
12
|
|
Circuits
|
6
|
|
Rated Voltage
|
120V
|
|
Rated Frequency
|
60 Hz
|
|
Input Current
|
15A
|
|
Ingress Protection
|
IP67 / NEMA 12X
|
|
Approvals
|
CE, UL 508A
|
📋 Basic Installation Overview
1. Confirm Location: Check that the enclosure footprint works for the machine, panel, or junction point and that there is enough room for conduit, cable entry, and service access.
2. Verify Ratings: Match the installation to the listed voltage, current, conductor size, approvals, and ingress protection rating before wiring the enclosure.
3. Plan Terminations: Use the integrated terminal block to organize incoming and outgoing conductors, keeping each circuit labeled and serviceable.
4. Mount Securely: Use the molded mounting dimensions and screw boss locations to position and secure the enclosure according to the application requirements.
5. Check Sealing: Inspect the cover, gasket area, and cable entries before operation to help maintain the environmental rating.
Always follow applicable electrical codes and the product documentation for the LiteCycle SG-AL-6P-R2 enclosure.
✅ Quick Selection Check
Product: LiteCycle SG-AL-6P-R2
Dimensions: 70 mm W x 93 mm L x 52 mm H (2.75" x 3.66" x 2.05")
Circuits / Terminations: 6 circuits / 12 terminations
Voltage / Current: 120V / 15A
Protection Rating: IP67 / NEMA 12X
📄 Product Documents and Selector
• Industrial Enclosure & Junction Box Selector
Use the selector to compare LiteCycle enclosure sizes, terminal counts, and application fit before choosing a replacement or specifying a new junction box.
|
|
|
 |
|
 |
|
