 |
 |
 |
|
Sealcon FL-11-BK PG11 Flange Bulkhead Conduit Fitting, Black Nylon
Black nylon flange and bulkhead conduit fitting for PG 11 thread, with three mounting holes, a Buna-N seal, IP 65 (total protection from dust and low pressure water jets from any direction), and a lift-up upper section for conduit installation.
Why Choose the Sealcon FL-11-BK Flange Conduit Fitting?
The Sealcon FL-11-BK is a black nylon flange and bulkhead conduit fitting designed for PG 11 thread. The three-hole mounting flange secures the fitting at the entry point while the body clamps around the conduit tubing.
The fitting combines conduit support and cable-gland functionality in one assembly. It includes a Buna-N seal and gasket, uses a lift-up upper section for installation, and is rated IP 65 (total protection from dust and low pressure water jets from any direction)
🔩 Three-Hole Flange
Bulkhead mounting layout with three screw holes
📐 PG 11 Connection
Uses a PG 11 thread
🛡️ Sealed Nylon Body
Black nylon construction with Buna-N seal and IP 65 (total protection from dust and low pressure water jets from any direction)
⬆️ Lift-Up Installation
Upper section lifts to simplify conduit placement
⚠️ Confirm Mounting Pattern and Conduit Fit
Before ordering, verify the PG 11 thread, three-hole mounting pattern, hole-center distance, hole diameter, and overall fitting dimensions.
📋 Flange and Bulkhead Installation
This fitting uses a three-hole flange to mount at a panel or bulkhead entry and clamps around the conduit tubing. The upper section lifts for installation, and the integrated construction avoids loose fitting components while combining conduit and cable-gland functions.
Key Features & Benefits
- Thread size: PG 11
- Black Nylon with Buna-N Seal
- Ingress protection: IP 65 (total protection from dust and low pressure water jets from any direction)
- Operating temperature: -40 F to 230 F (-40 C to 110 C)
- Upper portion lifts up for easy installation of cable
- Combines conduit & cable gland
- No loose components
- Includes gasket
- V0 rated
- Approvals and compliance: RoHS Compliance, Deca BDE, Registration, Evaluation, Authorization and Restriction of Chemicals, Waste Electrical and Electronic Equipment Directive, EAC, UR
- Alternate Hummel part number: 1.312.1101.11
- Sold individually
Technical Specifications
|
Brand
|
Sealcon
|
|
Product Type
|
Flange / Bulkhead Conduit Fitting
|
|
Sealcon Part Number
|
FL-11-BK
|
|
Hummel Part Number
|
1.312.1101.11
|
|
Thread Size/Type
|
PG 11
|
|
Length
|
1.93" (49 mm)
|
|
Width
|
1.85" (47 mm)
|
|
Height
|
1.38" (35 mm)
|
|
Hole Center Distance
|
1.46" (37 mm)
|
|
Hole Diameter
|
.17" (4.3 mm)
|
|
Material
|
Black Nylon with Buna-N Seal
|
|
Ingress Protection
|
IP 65 (total protection from dust and low pressure water jets from any direction)
|
|
Operating Temperature
|
-40 F to 230 F (-40 C to 110 C)
|
|
Approvals / Compliance
|
RoHS Compliance, Deca BDE, Registration, Evaluation, Authorization and Restriction of Chemicals, Waste Electrical and Electronic Equipment Directive, EAC, UR
|
📋 Basic Installation Overview
1. Verify Fit: Confirm the PG 11 connection and the three-hole flange dimensions.
2. Prepare the Mounting Point: Check the hole-center distance and hole diameter against the panel or bulkhead.
3. Position the Fitting: Place the gasket and fitting at the conduit entry location.
4. Install the Conduit: Lift the upper section, position the conduit tubing, and close the fitting around it.
5. Secure and Inspect: Fasten the flange with suitable mounting hardware and confirm the gasket and conduit are seated correctly.
Follow the equipment and conduit manufacturer instructions and applicable installation requirements.
📦 What's Included
• (1) Sealcon FL-11-BK flange / bulkhead conduit fitting
• (1) Integrated gasket
|
|
|
 |
|
 |
|
