The MURR DIN 43650 Form A solenoid valve connector (Part No. 7000-18021-6361000) is made to provide a reliable connection in industrial automation systems. Designed for solenoid valves, hydraulic and pneumatic actuators, and sensors, this connector features 2 poles + 2 grounds with 18mm pin spacing and durable 10 meter PUR cable. The integrated 24V AC/DC LED indicator gives live voltage status while the MOV surge suppression provides overvoltage protection of both the source and load.
It has a chemical- and oil-resistant plastic housing for an extended field life and comes with a PUR gasket and center screw. Rated IP67 for dust tight and water resistant connection.
Specifications
- Housing: Black Plastic
- Type of Contact: Screw
- Contact Spacing: 18 mm
- Number of Poles: 2 + 2 Ground
- Cable Length: 10 Meter
- Operating Voltage: 24 V AC/DC
- Operating Current: 4 Amps
- Switch Off Peak: 55 V
- Switch Off Delay Time: 20ms
- Locking of Ports: M3
- Gasket: PUR
- Temperature Range: -13 F to 185 F
- Diameter of Wires: 3 x 0.75 mm2
- Wire Isolation: Polypropylene
- Jacket: PUR
- Cable Outer Diameter: 5.9 mm
- Bend Radius (moving): 10 x outer diameter
- Cable Temperature Range (fixed): -40 F to 176 F
- Cable Temperature Range (mobile): -13 F to 176 F
- Approvals: CSA, CE
- Protection Class: IP 67 when plugged and screwed down
- Circuit Type: 24V AC/DC LED Indicator + MOV Suppression
