 |
 |
 |
|
Fandis TRT-10A230V-NCF Enclosure Thermostat: Normally Closed, 110–250V AC, 14–176°F
DIN-rail bimetallic thermostat for electrical enclosure temperature control. The normally closed contact supports cabinet fan or high-temperature alarm circuits, while the adjustable 14–176°F range provides flexible control for industrial panels and automation enclosures.
🌡️ Normally Closed Enclosure Temperature Control
The TRT-10A230V-NCF uses a normally closed contact and a bimetallic sensing element to manage temperature-dependent equipment inside an enclosure. Its external adjustment allows the switching point to be set directly on a Fahrenheit scale from 14 to 176°F.
Control Cabinet Temperature with a Compact DIN-Rail Thermostat
Excess heat inside an electrical cabinet can shorten component life and interrupt equipment operation. The Fandis TRT-10A230V-NCF provides a straightforward way to control an enclosure fan or activate an alarm at a selected temperature, helping operators respond before internal heat becomes a larger problem.
The compact RAL 7035 housing is made from self-extinguishing PA66 material and mounts to DIN rail for clean panel integration. A terminal-block connection, 18–14 AWG wire compatibility, IP20 protection, and contact endurance exceeding 100,000 cycles make it suitable for dependable enclosure temperature-control circuits.
🌡️ 14–176°F Setting Range
Wide Fahrenheit adjustment range for matching the thermostat to enclosure operating requirements
⚡ 110–250V AC
10A rated current with 15A contact current-carrying capacity
🔧 DIN-Rail Mounting
Compact format simplifies installation inside industrial control cabinets
⏱️ 100,000+ Cycles
Durable contact design supports long-term switching service
Key Features & Benefits
- Normally Closed Contact: Designed for temperature-dependent fan or alarm control circuits that require NC contact behavior
- Bimetallic Sensing Element: Provides direct mechanical temperature response without a separate electronic sensor
- Wide Adjustable Range: External Fahrenheit scale adjusts from 14 to 176°F
- Electrical Ratings: 110–250V AC, 10A rated current, and 15A contact current-carrying capacity
- DIN-Rail Installation: Compact enclosure thermostat mounts neatly with other panel-control components
- Self-Extinguishing Housing: PA66 construction meets UL 94V-0 material requirements
- IP20 Protection: Rated according to EN 60529 for protected installation inside an enclosure
- Approvals: CE and cURus approved
Specifications
|
Part Number
|
TRT-10A230V-NCF
|
|
Brand
|
Fandis
|
|
Product Type
|
Bimetallic enclosure thermostat
|
|
Contact Configuration
|
Normally closed (NC)
|
|
Voltage
|
110–250V AC
|
|
Rated Current
|
10A
|
|
Contact Current Capacity
|
15A
|
|
Setting Range
|
14 to 176°F
|
|
Storage Temperature
|
-40 to 194°F
|
|
Electrical Connection
|
Terminal block
|
|
Recommended Wire Size
|
18–14 AWG
|
|
Mounting
|
DIN rail
|
|
Protection Rating
|
IP20
|
|
Housing Material / Color
|
Self-extinguishing PA66 / RAL 7035
|
|
Dimensions
|
1.14 in. W × 2.83 in. L × 1.81 in. D
|
|
Maximum Humidity
|
90%
|
|
Net Weight
|
1.9 oz.
|
|
Contact Endurance
|
More than 100,000 cycles
|
⚙️ Control Function
Use the adjustable thermostat as part of a cabinet fan-control or high-temperature alarm circuit. The bimetallic element responds to enclosure temperature, while the external knob makes the setpoint easy to select during installation or service.
⚠️ Verify Contact Operation
This model has a normally closed contact. Confirm that NC operation matches the control logic of the connected fan, alarm, or other device before ordering or wiring the thermostat.
🔧 Installation Notes
Mounting: Install on DIN rail inside the electrical enclosure.
Wiring: Use the terminal block with 18–14 AWG conductors and follow the equipment wiring diagram.
Adjustment: Set the required temperature with the external Fahrenheit-scale knob.
🏭 Enclosure Temperature Management
The TRT-10A230V-NCF is a practical choice when a control cabinet needs a simple mechanical switching device that reacts to internal temperature. Its compact size allows it to fit alongside relays, terminal blocks, and other DIN-rail controls without requiring a separate sensor assembly.
|
|
|
 |
|
 |
|
