 |
 |
 |
|
Sealcon EM11AA-BK PG 11 Elbow Nylon Conduit Fitting, Fits Size 12
Black Nylon Plastic with Buna-N O-Ring push-in elbow conduit fitting with PG 11 thread fits nominal conduit size 12 IP 54 - NEMA 2 IP 65.
Why Choose the EM11AA-BK Conduit Fitting?
The EM11AA-BK is a Sealcon black nylon push-in elbow conduit fitting for routing conduit through a 90° entry point. It uses a PG 11 thread and fits nominal conduit size 12.
The elbow snaps together after wires are inserted, while the locking ridge helps hold conduit tubing in place. This makes it useful for control cabinets, machine wiring, automation panels, robotics equipment, and tight conduit paths where a straight fitting would not route cleanly.
🔩 PG 11 Thread
Installs into PG 11 threaded panel or enclosure openings
📏 Fits DN 12
Matches nominal conduit size 12 for routed wire and cable protection
🧱 Durable Material
Black Nylon Plastic w/ Buna-N O-Ring
🛡️ Rated Protection
IP 54 - NEMA 2 IP 65
⚠️ Confirm Thread, Conduit Size, and Elbow Clearance
Before ordering, verify the PG 11 thread, nominal conduit size 12, clearance hole, bend direction, and available space around the elbow. Also confirm whether the installation uses the O-ring seal or fixed conduit mounting for the required protection level.
📋 Push-In Elbow Installation Notes
This elbow style combines a 90° fitting with a straight push-in conduit connection. It is helpful when wires need to turn immediately after entering a panel, junction box, machine frame, or compact equipment housing.
Key Features & Benefits
- PG 11 thread connection
- Fits nominal conduit DN size 12
- Black Nylon Plastic w/ Buna-N O-Ring
- IP 54 - NEMA 2 (with O-Ring) IP 65 (with fixed conduit mounting)
- Operating temperature: -20 C to 80 C (-4 F to 176 F)
- Combines 90 degree elbow with straight push in fitting
- Elbow snaps together once wires are inserted
- Locking ridge holds conduit tubing in place
- RoHS, REACH, WEEE, German Lloyd, and EAC compliance listed where applicable
Technical Specifications
|
Product Code
|
EM11AA-BK
|
|
Vendor Part Number
|
EM11AA-BK
|
|
Product Type
|
Push-In Elbow Conduit Fitting
|
|
Hummel Number
|
1.513.1101.14
|
|
Material
|
Black Nylon Plastic w/ Buna-N O-Ring
|
|
Thread Size/Type
|
PG 11
|
|
Fits Conduit DN Size
|
12
|
|
Clearance Hole
|
0.73" (18.5 mm)
|
|
Body Length (when closed)
|
1.89" (48 mm)
|
|
Wrench Flat
|
.87" (22 mm)
|
|
Height (when closed)
|
1.06" (27 mm)
|
|
Thread Length
|
0.31" (8 mm)
|
|
Protection Rating
|
IP 54 - NEMA 2 (with O-Ring) IP 65 (with fixed conduit mounting)
|
|
Operating Temperature
|
-20 C to 80 C (-4 F to 176 F)
|
|
Approvals / Compliance
|
RoHS Compliance, Deca BDE Compliance, REACH, WEEE Directive, German Lloyd, EAC
|
📋 Basic Installation Overview
1. Confirm Opening: Match the panel or enclosure opening to the PG 11 thread and listed clearance hole.
2. Check Conduit Size: Verify that the conduit matches nominal size 12.
3. Insert Wires: Route conductors through the elbow before snapping the body together.
4. Lock Conduit: Seat the conduit tubing against the locking ridge so it stays in place.
5. Inspect Seal: Check the O-ring, bend direction, and conduit path before energizing equipment.
Always verify installation requirements against the equipment, panel, and conduit system before use.
📦 What's Included
• Conduit fitting
• Buna-N O-ring
📞 Sealcon / Hummel Support
Sealcon conduit fittings are also known by their corresponding Hummel part numbers. Confirm thread size, conduit DN size, material, and sealing requirements against the equipment design before installation.
|
|
|
 |
|
 |
|
