Boxco BC-ATP-212113 Enclosure, 210x210x130, Clear Cover, ABS

Boxco BC-ATP-212113 is a hinged lid enclosure. Back plates for mounting interior components, wall mounting brackets, and optional latch locks sold separately (see below). Gasket is molded around the lid of the enclosure. Holes can be drilled into the sides for cable glands if cables need to be run through the enclosure.

8.27" Width x 8.27" Length x 5.12" Depth (210 x 210 x 130 mm)
Constructed from ABS plastic
Clear cover
Molded hinges
Stainless steel latches
Built in key ring
-40 C to 70 C (-40 F to 158 F)
Rated IP 66/67, NEMA 4X
Flammability Rating: UL94-HB
Impact test: IK07/08
CE, TUV, RoHS

Boxco P Series Enclosure Downloads

	Boxco BC-AGS-081107 Enclosure, 80x110x70, Solid Gray Screw Cover, ABS Plastic $7.48
	Mueller BU-190700132 Yellow Vinyl Insulated Ring Terminal, Stud Size 1/4", 12-10 AWG $0.24
	Boxco BC-AGS-081608 Enclosure, 80x160x85, Solid Gray Screw Cover, ABS Plastic $13.19
	Macromatic THR-10266-37 Encapsulated Time Delay Relay, On Delay, 12V, 10-1000 Min $26.92
	Macromatic THR-12268-37 Encapsulated Time Delay Relay, Single Shot Falling Edge, 24V, 10-1000 Min $28.28
	Mencom MCVH-FR-PIN-16 M23 Female Crimp Pin, 6 Pole, 30A, 14-16 AWG $4.61
	Meltric 513M3 DSN60 Nylon 30 Degree Angle Adapter $56.73
	Mencom MDC-4FR-BM-1M M12 Back Mount Receptacle - 4 Pin Female, Straight Connector, 4A, PG9 Mounting Thread, 1 Meter $21.17

Boxco BC-ATP-212113 Enclosure, 210x210x130, Clear Hinged Lid, ABS Plastic

Industrial Enclosure & Junction Box Selector