 |
 |
 |
|
AerosUSA 1731022124 SPG 24G DES Cable Entry Insert: 1 entry, 0.94"-0.98" (24-25mm)
Compact split cable-entry grommet for AerosUSA DES frames. The gray TPE insert seals 1 cables with a 0.94"-0.98" (24-25mm) outside diameter and allows preterminated cables to pass through an enclosure without removing their connectors.
✅ Designed for AerosUSA DES Cable Entry Frames
The SPG 24G large-size insert slides into a compatible DES cable entry frame and can be exchanged with other SPG inserts as cable requirements change. Its split design supports cables that already have connectors attached and corrugated conduit tubing, helping simplify enclosure wiring and maintenance.
Compact Cable Routing for Preterminated Connections
The AerosUSA 1731022124 SPG 24G insert provides 1 precisely sized cable entry for 0.94"-0.98" (24-25mm) cables or compatible corrugated conduit tubing. Installers can keep attached connectors intact, reducing retermination work during panel assembly, machine retrofits, and maintenance.
The UV-resistant Gray TPE (thermoplastic elastomer) construction is halogen- and silicone-free. When correctly installed as part of the DES system, the insert supports IP66 protection against dust and powerful water jets. Inserts are packaged in quantities of 10 and are sold separately from the cable entry frame.
✂️ Split Insert Design
Route cables with connectors already attached, without cutting or reterminating the cable.
🧩 Modular DES Fit
Slides into a compatible DES frame and can be exchanged with other SPG inserts.
💧 IP66 System Protection
Supports dust-tight, water-jet-resistant performance when used in a properly installed DES system.
🏭 Industrial TPE
UV-resistant material is halogen-free and silicone-free for industrial installations.
Key Features & Benefits
- 1 Cable entry: Sized for cables with 0.94"-0.98" (24-25mm)
- Industrial Resistance: Resists ultraviolet exposure
- Material Composition: Halogen-free and silicone-free Gray TPE (thermoplastic elastomer)
- System Sealing: Supports IP66 protection when used with the DES system
- Pack Quantity: Sold in packs of 10 inserts
Specifications
| Part Number | 1731022124 |
|---|
| Brand | AerosUSA |
|---|
| Series / Model | SPG 24G |
|---|
| Insert Size | Large |
|---|
| Housing Material | Gray TPE (thermoplastic elastomer) |
|---|
| Cable Entries | 1 |
|---|
| Cable Diameter | 0.94"-0.98" (24-25mm) |
|---|
| Temperature Range | -40 C to 110 C (-40 F to 230 F) |
|---|
| Dimensions | 1.93" Width x 1.97" Height x 0.98" Depth |
|---|
| Flammability Rating | UL 94 V0 |
|---|
| Ingress Protection | IP 66 (Total protection from dust and high pressure water jets from any direction) when used with DES system |
|---|
| Approvals / Compliance | NEMA 4X (indoor use), C UR US, Ecolab, RoHS Compliant |
|---|
| Package Quantity | 10 inserts |
|---|
📦 Package Contents
• (10) AerosUSA SPG 24G large-size inserts
• Cable entry frame is not included and is sold separately
📏 Confirm Cable Size Before Ordering
Choose SPG 24G when the installation needs 1 0.94"-0.98" (24-25mm) cable passages in a gray insert. Measure each cable's outside diameter before selecting the insert.
🔧 Installation Notes
Open the split insert: Position it around each cable without removing the attached connector.
Seat each cable: Make sure every cable matches the specified 0.94"-0.98" (24-25mm) diameter.
Install in the frame: Slide the insert fully into a compatible DES frame position to support the stated system protection.
⚙️ Typical Applications
Control panels: Organize preterminated sensor, actuator, power, or communication cables
Machine enclosures: Add or replace cable passages without connector removal
Cable or conduit routing: Route 1 cable or compatible corrugated conduit through one large-size DES frame position
|
|
|
 |
|
 |
|
