Home > EternaBond RoofSeal Tape >

EternaBond RSB-2-50 2" x 50' Black RoofSeal Sealant Tape

EternaBond RoofSeal
EternaBond RSB-2-50 2" x 50' Black RoofSeal Sealant Tape
  
Price: $39.85
Note: Call for Availability
MFG P/N: EB-RB020-50R
MFG: EternaBond
Weight (lbs): 1



Availability: Out of Stock
Product Code: RSB-2-50
Qty:

Description
 

The EternaBond RSB-2-50 RoofSeal tape is black with a 50 foot length and a 2 inch width. Total thickness is 35 mil. RoofSeal has a UV protected backing so it can last in sunny areas. With its high elongation factor, it is able to expand or contract along with changing conditions.

  • Easy to install
  • Liquid tight
  • UV protection
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Useful for roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Feature MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Compatible with EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 2" x 50'
  • Color: Black
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

EternaBond Black Roof Repair Tape
Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet



Sealcon EM20MA-BK M20 Elbow Push In Conduit Fitting, Fits Size 14 $15.24
Light Efficient Design LED-8027M345-G7-FW 80W 100W 110W Post Top LED Light, 3000K 4000K 5000K, 120/277V $127.00
Mencom MCG-36R PG 36 .787-1.02" (20-26mm) Cable Gland $39.41
Macromatic TD-81522-41 1 - 1023 Sec Single Shot 120V Time Delay Relay $69.20
Deca CQV16/4 Cross Jumper for CDU16 DIN Rail Terminal Block, 4 Pole $2.82
Z+F V30AE000082 Black Polypropylene Insulated End Sleeve, 16 AWG, 0.55" Length $0.02
Mencom CRB-29PA/SW PG 29 Cable Gland Plug, Black Plastic $1.25
DuraChoice PB204B-030 Oil Filled Pressure Gauge, 2" Dial, 1/4" NPT, 0-30 PSI, Back Mount $10.87
Seifert 4711122001 Fan Filter 115mm x 115mm 120 Vac 14 CFM Gray $61.25