Home > Pressure Gauges & Thermometers > Mounting Brackets >

DuraChoice PGBF-250 Back Flange Panel Mounting Bracket for 2-1/2" Pressure Gauge

DuraChoice Back Flange Panel Mounting Bracket for 2-1/2" Pressure Gauge
DuraChoice PGBF-250 Back Flange Panel Mounting Bracket for 2-1/2" Pressure Gauge
  
Price: $2.13
Note: Please call or email [email protected] for alternatives
MFG P/N: PGBF-250
MFG: DuraChoice
Weight (lbs): 0.06

Quantity in Stock :(Out of Stock)


Availability: Out of Stock
Product Code: PGBF-250
No Longer Available

Description
 

The DuraChoice PGBF-250 back flange panel mounting bracket is made for 2-1/2" size pressure gauges with lower mount connections. Made from 304 stainless steel. Mounts the gauge to an instrument panel without having to pre-cut the panel. Used for oil filled gauges only.

To Install: Make sure the protective film has been removed before installing. The bracket is mounted to the wall, with the flange side facing outward. The cut side of the bracket should correspond to where the connection is on the gauge. Press the gauge into the bracket with the connection fitting into the cut side.

PGBF-250 Back Flange Bracket for 2-1/2" Pressure Gauge



Mencom MDC-5FR-2-4M-18 M12 Receptacle, 5 Pin Female, 4A, 4 Meter Lead, 1/2" NPT, 18 AWG Wire $40.08
Mueller BU-1420721881 SMA Connector Jack, PCB Edge Mount, 50 Ohm, Gold Plated Brass, Single Contact $4.67
Mencom RJ45-M25-PA RJ45, M25 Plastic Port Adapter $15.89
Sealcon NM-12-GY Gray M12 Locking Nut $0.19
Menics PTE-AF-502-RYGBC-B 56 mm 5 Stack LED Tower Light, Red Yellow Green Blue Clear, Flashing, Pole Mount, 24V $159.88
Deca A20P-1BEQ3S 22 mm Blue LED Pilot Lamp, Marking Plate Head, 12V $10.89