Home > EternaBond RoofSeal Tape >

EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape

EternaBond RoofSeal
EternaBond RSG-8-50 8" x 50' Gray RoofSeal Sealant Tape
  
Alternative Views:
Price: $143.80
Note: Call for Availability
MFG P/N: EB-RG080-50R
MFG: EternaBond
Weight (lbs): 8



Availability: Out of Stock
Product Code: RSG-8-50
No Longer Available

Description
 

The EternaBond RSG-8-50 RoofSeal leak repair tape is gray with a 50 foot length and an 8 inch width. Total thickness is 35 mil. RoofSeal's UV stable backing lets be used in applications that receive a lot of sun. It has a high elongation factor, so it can expand or contract along with changing conditions.

  • Easy installation, only a small amount of surface prep needed
  • Liquid tight seal
  • UV protected
  • High elongation factor
  • Can stick to itself & fit around objects
  • Adhesive has silicone lining to prevent tape from sticking before application
  • Perfect for roof & leak repair, land-fill or pond linings, skylights, gutters, and seam repair
  • Uses MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Works on EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and other kinds of roofing material

Specifications

  • Roll Size: 8" x 50'
  • Color: Gray
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 35 mil +/- 2 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

EternaBond RoofSeal Downloads

EternaBond RSG-8-50 Sealant Tape
Additional Product Information

Installation

The area should be dry and free from debris or other substances before RoofSeal can be applied. Remove the lining as the tape is being applied to prevent mistakes and keep the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before applying.

RoofSeal Data Sheet



Qronz TL70BK-NR-QD24 70 mm 1 Stack LED Tower Light, Red, Quick Disconnect, 24V, Diffused Lens $49.56
MURR 7000-08041-2201500 M8 Cordset Female, 3 Pole, 4 A, 15 M $71.50
Kacon KXL-302 Heavy Duty Limit Switch with Roller Plunger, Snap Action, 1NO 1NC Contacts $32.15
Mencom RJ45-M25-PA RJ45, M25 Plastic Port Adapter $15.89
AerosUSA 1732052412 DES-PM 24/12G Cable Entry Plate, 12 15mm Entries $13.82
Kacon KSR5015ZDHF Single Phase Solid State Relay w/ Fan, 24V DC Input, 90-480V AC Load, 15A $100.11
AerosUSA 1731021100 SPP K 0G Insert for Cable Entry Frame, Blank, Set of 10 $22.41
Cable Tie Express 14-120-N-STP 14.5" Natural Nylon Cable Ties with Stainless Steel Tooth, 120 lb Tensile Strength, 100 Pack $13.65