 |
 |
 |
|
The Menics MWETB-3FF-RYG LED wall mount signal light with alarm has a low profile white plastic housing and is rated for 110-220V. It has red, yellow, & green LED colors behind a single clear lens, with a steady & flashing light. Made for wall mounting. The signal light itself comes pre-wired with 800 mm (31.5") lead wire. Color & light mode is chosen based on the wiring (see wiring diagram). The multi-channel split lens design allows two colors to be displayed on the signal light, with the top & bottom each showing a different color. The lens allows the LEDs to be seen from a distance. Rated IP 52.
Specifications
- Mounting- Wall Mount
- Housing Material- White Plastic with Clear Lens
- Lens Material- Polycarbonate Resin
- Light Operation- Steady & Flashing w/ Alarm
- Power Supply- 110-220V AC
- Current Consumption- 0.08 Amps
- LED Colors- Red Yellow & Green
- Dimensions- 194 mm Height x 90 mm Width x 40 mm Depth (7.64" x 3.54" x 1.57")
- Flash Rate- 85 times per minute
- Buzzer Volume- 75 dB (at 1 Meter)
- Vibration Resistance- 0.75 mm @ 10-55Hz
- Dielectric Strength- 1000VAC 50/60Hz for 1min
- Insulation Resistance- 100 MΩ minimum (500VDC mega)
- Ambient Temperature- -20 C to 40 C (-4 F to 104 F)
- Storage Temperature- -20 C to 70 C (-4 F to 158 F)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 52 (Partial protection from dust and droplets up to 15 degrees from vertical)
- Approvals- UL Listed, CE, RoHS
Menics MWETB-3FF-RYG Split Lens 110-220V Wall Mount LED Signal Light
|
|
|
 |
|
 |
|
