Home > Relays > Intrinsically Safe Relays >

Macromatic ISDUR4 4 Channel Intrinsically Safe Relay, 102-132VAC / 10-125VDC, Independent Configuration

Macromatic 4 Channel Intrinsically Safe Relay, 102-132VAC / 10-125VDC

Alternative Views:

Price: $271.22

Note: Ships in 10-15 Business Days. Contact us to confirm current ship date
MFG P/N: ISDUR4
MFG: Macromatic
Weight (lbs): 0.5

Availability: In Stock
Product Code: ISDUR4

Qty:

Description

The Macromatic ISDUR4 is a 4 channel intrinsically safe relay. This DIN-rail or panel mount relay has an input voltage of 102-132VAC / 10-125VDC. It helps to monitor up to four loads from a hazardous location and has an output of 5A SPST-NO. It can be used in Class I Div 1 Groups A, B, C, and D, Class II Div 1 Groups E, F, and G, and Class III Div 1. It has a 60mm wide housing. The inputs and isolated outputs each have 2 terminals. The LED shows the status of the relay. Easier wiring is provided by the pluggable terminal blocks. Please note that the relay itself needs to be installed in a safe area.

Specifications

Relay Function- Intrinsically Safe Four Channel
Input Voltage- 102-132VAC / 10-125VDC
Output- 5A SPST-NO
Load- 5VA Max
Operating Temperature- -28 C to 60 C (-18 F to 140 F)
Storage Temperature- -55 C to 85 C (-67 F to 185 F)
Output Contacts- SPST-NO 3A Resistive @ 125V AC @ 60 C & 30V DC Resistive, Pilot Duty Rating D300; SPST-NO 5A Resistive @ 125V AC @ 40 C & 30V DC Resistive, Pilot Duty Rating D300
Life- Mechanical: 5 Million Closures @ No Load, Electrical: 50,000 Closures @ Full Load AC
Response Time- With No Delay: <50ms; With Delay: 2 Seconds
Insulation Voltage- 1500VAC between coil & contacts, 750VAC between open contacts, 1500VAC between contacts of different output channels, 1500VAC between hazardous & safe circuits
Wire Sizes- One 14-24 AWG Conductor or Two 16 or 18 AWG Conductors
Housing Dimensions- 4.36" Height x 2.36" Width x 2.6" Depth
Approvals- UL & CUL Listed, CE

The V LED is green when the voltage is introduced. The input LED is green while the input device is closed. The output LED is orange when the relay is energized. This four channel relay has four modes of operation, including Standard Logic, Inverse Logic, No Time Delay, and Fixed 2 Second Delay (see Instructions tab). Two DIP switches on top allow the user to select between Standard or Inverse Logic and a 0 Second or 2 Second Time Delay. Can be installed on a 35mm DIN-Rail or on a panel with two #8 screws with the DIN-Rail clips extended.

Macromatic ISD Series Relay Installation Manual

Macromatic 4 Channel DIN-Rail Mount Intrinsically Safe Relay

	Saginaw SCE-36EL3012LPPL Single Door Enclosure w/ 3 Point Hardware, 36" x 30" x 12" $907.25
	Light Efficient Design LED-7320-FC1-G4 10W, G24q PL Light, 3000K 3500K 4000K, 120-277V, 4 Pin $14.95
	ILME CAP-10L29 C-Type Surface Mount Housing, Size 57.27, Single Lever, PG 29 $44.02
	Macromatic LCP2B250F4 120V Single Probe Liquid Level Relay, Pump Down, 1K to 250K, 4 Sec Delay $90.38
	Light Efficient Design LED-7343-FC-G3 16W, 2G11 PLL LED Light, 3000-6500K, 120-277V $14.99
	ILME CTSEF-24R CTSE Series Insert, Female, Size 104.27, 24 Pin, 16A, Spring Right $99.54
	ILME TMAP-10.25 T-Type Surface Mount Housing, Size 57.27, Double Lever, M25 $29.40
	DuraChoice PLS254L-003 Low Pressure Capsule Gauge, 2-1/2" Dial, 1/4" NPT, 0-3 PSI $44.51